[Dxspider-support] KPC-3

[Radioman]

Geese Larry, i use a standard Serial cable with my KPC-3
but the KPC-3 does have some issues with the AGW engine, at timesthe KPC-3
it will not allow the kiss command from the engine, and other times it only
RX no TX so before i have the engine running i issue the command
int kiss
at the command prompt in the TNC.
using the real kiss commad in the TNC i have no problems.

i have both the KPC-3 and the KPC-9612 the 9612 don't have the problem
just the 3
i don't know if i can help but i have the FT-2400 radio, with the telephone
style mic cord.
may be the same

Tony
Nodes N1LDY/K1RFI



----- Original Message -----
From: "Larry K2LS" <k2ls at optonline.net>
To: "dx spider" <dxspider-support at dxcluster.org>
Sent: Sunday, December 08, 2002 8:57 PM
Subject: [Dxspider-support] KPC-3


> Anyone using the KPC-3 with AGW/SPIDER?
>
> I need pinouts from the KPC3 to the computer serial port and the KPC3 to a
> Yaesu FT-2500.
>
> Can anyone help please.
>
> Thanks
>
> 73, Larry
> K2LS at OPTONLINE.NET
>
>
>
> _______________________________________________
> Dxspider-support mailing list
> Dxspider-support at dxcluster.org
> http://www.tobit.co.uk/mailman/listinfo/dxspider-support
>