[Dxspider-support] SSID -6 problems (again?)

Erminio Pandocchi i2eow at fastwebnet.it
Thu Nov 28 17:19:54 GMT 2002


If you are interested I can send you the AGWMSG program
The problem is that when you change release you must keep the modified agwsmsg hoping
that it has not been modified in the new release
Erminio -I2EOW
----- Original Message -----
From: "Clas-Olof Bergman" <clas-olof.bergman at se.flextronics.com>
To: <dxspider-support at dxcluster.org>
Sent: Thursday, November 28, 2002 10:28 AM
Subject: [Dxspider-support] SSID -6 problems (again?)


> Hello All !
>
> I just discovered a problem with our Spider nodes using SSID -6. In Sweden
> all cluster nodes use -6 as SSID.
> We have a Spider DXC with call SK3BG-6 running without any problem. If a
> neighbour node (also using SSID -6)
> connects it appears as a regular user because SSID -6 get manipulated in
> some way. By coincident I discovered
> that if the neighbour node use SSID -9, it get recognized as -6 on our node
> and initizing starts....
> Right now we must do outgoing connects to all our neighbour nodes.
>
> I have looked in the archive and found a couple of messages about the same
> problem from Ermino I2EOW
> and he did some changes to AGWmsg.pm to fix this. Is this a bug with SSID -6
> or ....???
>
> I also found some answers in the achive directed to Ermino but to me it
> looks like that the Erminos question
> was not understood and no one relly realized what he was trying to get help
> with.
>
> We run on a WIN98 PC with AGW PE on a single serialport with a Tiny-2 TNC.
> Dont remember right now what build we are currently using, but upgraded to
> latest CVS in the
> beginnig of november. (Node is on remote hilltop site without internet etc.)
> All the neighbour node are defined in SK3BG-6 so thats not the problem.
>
> Below is from Erminos mail just as a reminder of his problem:
>
> _ _ _ _ _ _ _ _
>
> Ok this was the situation
> set/node i2vxj-6
> then a script to connect i2vxj-6
> conne i2vxj-6   and all is ok.
> But if i2vxj-6 connects me is seen without ssid and so becomes an user
> Looking ik AGWMsg.pm I have found the follwing instructions
> $s = 15 - $s;
>  if ($s <= 8 && $s > 0) {
>       $call = "${c}-${s}";
>      } else {
>     $call = $c;
> Of course 15-8 = 7 and the -6 is lost!
> I have changed in this way
>   if ($s <= 8 && $s > 4) {
>       $call = "${c}-${s}";
>      } else {
>       if ($s >=9){
>         $s = 15-$s;
>         $call="$(c)-$(s)";}
>       else{
>       $call = $c;}
> and it works
> I wonder if my correction is ok
> Erminio I2EOW sysop of IK2EKY-6
> -----------
>
> Please any comments or suggestions on this problem ?
>
> 73 de Classe SM3GSK
>
>
>
> ------------------------------------------
> Classe Bergman
> Radio Network Planning
> Flextronics  Network Services, Sundsvall
> clas-olof.bergman at se.flextronics.com
>  +46 60 14 52 91
> Mobile: +46 70 59 22 302
>
>
>
>
> _______________________________________________
> Dxspider-support mailing list
> Dxspider-support at dxcluster.org
> http://www.tobit.co.uk/mailman/listinfo/dxspider-support
>







More information about the Dxspider-support mailing list