[Dxspider-support] Tiny-2 TNC Problem

[Keith Le Boutillier]

Hi Bill

I had the same problem with my Tiny2

I traced the problem on my Tiny2 to the Z80SIO IC socket letting go on some
pins.
I changed the IC socket to a good quality turned pin holder and it been fine
since.

Hope that helps.

73 Keith
MU3EFB GU6EFB sysop GB7DXG cluster

-----Original Message-----
From: dxspider-support-bounces at dxcluster.org
[mailto:dxspider-support-bounces at dxcluster.org]On Behalf Of Bill & Chris
Shell
Sent: 23 February 2003 03:18
To: Dxspider-Support at Dxcluster. Org (E-mail)
Subject: [Dxspider-support] Tiny-2 TNC Problem

Hello,

I'm having a problem with a PacComm Tiny-2 TNC.  It occasionally locks up
with the 'sta' LED on.  Has anyone else had this problem, or know how to
resolve it?

The TNC is located about 150 miles away, and I don't have a copy of the
manual.  Assuming it will take any input from the serial port, does anyone
know of any command that would reset or restart the Tiny-2?

Thanks in advance!

73, Bill
N6WS
n6ws at charter.net

_______________________________________________
Dxspider-support mailing list
Dxspider-support at dxcluster.org
http://www.tobit.co.uk/mailman/listinfo/dxspider-support

**************************************************************
Scanned by  MailScan Content-Security and Anti-Virus Software.
Visit http://www.mwti.net for more info on eScan and MailScan.
**************************************************************

**************************************************************
Scanned by  MailScan Content-Security and Anti-Virus Software.
Visit http://www.mwti.net for more info on eScan and MailScan.
**************************************************************