[Dxspider-support] password

[radioman]

My cluster needs a password..
no place to add one?
Sri..
Tony
N1LDY


----- Original Message ----- 
From: "Lee Sawkins" <ve7cc at shaw.ca>
To: "radioman" <radioman at semarg.ath.cx>; "The DXSpider Support list"
<dxspider-support at dxcluster.org>
Sent: Monday, December 20, 2004 12:07 AM
Subject: Re: [Dxspider-support] can teh ve7cc SW be used to connect
toadxspider cluster .. if so how ??


> It can be linked to by telnet.
>
> http://www.bcdxc.org/ve7cc/logging.htm
>
> radioman wrote:
> >
> > Does it interface with log books like LIV-MUF does?
> > liv-muff used the DDE to link to logbook.
> >
> > Tony
> > N1LDY
> >
> > ----- Original Message -----
> > From: "Lee Sawkins" <ve7cc at shaw.ca>
> > To: "The DXSpider Support list" <dxspider-support at dxcluster.org>
> > Sent: Sunday, December 19, 2004 9:03 PM
> > Subject: Re: [Dxspider-support] can teh ve7cc SW be used to connect
> > toadxspider cluster .. if so how ??
> >
> > > Go to "Configuration>Cluster(Telnet)"
> > >
> > > In the "Node" box enter a call.
> > > Press "Add".
> > > The "Address" and "Port" boxes will appear.
> > > Enter the data and press "Apply"
> > > This will put the newly entered node at the very bottom of the "Node"
> > > list, where it can be selected at any time.  You can add as many as
you
> > > wish this way.
> > >
> > > Or, you can manually edit the "cluster.dat" file and enter nodes using
> > > the same format as the other ones.
> > >
> > > To really see what the program can do, you need to use the very latest
> > > of my releases and connect to a Dx Spider node with the latest
software
> > > build.  VA6AAA at "dxc.ve7cc.net" port 7373 is one that is running the
> > > lastest Dx Spider software.
> > >
> > > My program is at:  http://www.bcdxc.org/ve7cc/default.htm#prog
> > >
> > > I am still working on compatibility issues between my program and Dx
> > > Spider, so if you see anything strange, please let me know.
> > >
> > > Lee VE7CC
> > >
> > >
> > > William Liporace - NA2NA wrote:
> > > >
> > > > yes it can.. you do have to add the node to the list....
> > > > Have not tried, but it gives it as an example on his web site
> > > > Remember that most DXSpider nodes do not allow port 23 (you need to
> > specify
> > > > the port)
> > > >
> > > > Will
> > > >
> > > > ----- Original Message -----
> > > > From: "Dan Bookwalter" <n8dcj at yahoo.com>
> > > > To: <dxspider-support at dxcluster.org>
> > > > Sent: Sunday, December 19, 2004 8:32 PM
> > > > Subject: [Dxspider-support] can teh ve7cc SW be used to connect to
> > adxspider
> > > > cluster .. if so how ??
> > > >