[Dxspider-support] User Program
Han Sytsma
middenveld at tip.nl
Mon Jul 5 21:53:00 BST 2004
Hi Lee,
Understood, I sent a copy of this mail to the Spider list, with the complete
discussion, so Dirk can see what is going on.
All the other aspects of the program are functioning well, I'm happy with
it.
73 Han, PE1FAM
-----Oorspronkelijk bericht-----
Van: Lee Sawkins [mailto:ve7cc at shaw.ca]
Verzonden: maandag 5 juli 2004 22:20
Aan: Han Sytsma
CC: ve7cc at rac.ca
Onderwerp: Re: [Dxspider-support] User Program
Hi Han
I believe the problem with "Sh/dx/100 on 1800-21000000" is caused by a
bug in Dx Spider software.
sh/dx/100 on 1800-2100 is ok, sh/dx/100 on 1800-21000 is ok, but when
you get too many zeros then it does not work. Suggest you ask Dirk to
take a look.
Thanks for testing the software.
73 Lee
Han Sytsma wrote:
>
> Hi Lee,
>
> I did not have time to upgrade the cluster yet, I'm just at home due to a
> malfunctioning mailserver at my company.
> Set/page 0 is working now on the old cluster, but sh/dx/100 is still
causing
> a problem, so I tried it manualy:
>
> Sh/dx/100 on 1800-21000000 is not working
> Sh/dx/100 is working and sh/dx 1800-21000000 is working too
>
> I asume that the aditional "on 1800-21000000" is probably causing the
> problem?
>
> I did a little bit of testing with the filters and those seem all to work
> properly.
>
> 73 Han, PE1FAM
>
> -----Oorspronkelijk bericht-----
> Van: Lee Sawkins [mailto:ve7cc at shaw.ca]
> Verzonden: maandag 5 juli 2004 10:54
> Aan: Han Sytsma
> Onderwerp: Re: [Dxspider-support] User Program
>
> Hi Han.
>
> I have made some revisions and have posted the latest .exe file in the
> regular place.
>
> http://www.bcdxc.org/ve7cc/ve7cc.exe
>
> It is also called ver 2.104 but is slightly different than the one you
> have.
>
> 73 Lee
>
> Han Sytsma wrote:
> >
> > Hi Lee,
> >
> > I have a tested the cluster user program now with a newer version of DX
> > Spider running on a compaq server (PI8CDR-8).
> > Both commands are working properly at that cluster, on CDR-7 set/page 0
or
> > sh/dx/100 are not properly functioning when loggin in.
> > I must admit that PI8CDR-8 is a newer version of spider, so I will try
to
> > upgrade the CDR-7 cluster tomorrow night and have another try.
> >
> > 73 Han
> >
> > -----Oorspronkelijk bericht-----
> > Van: Lee Sawkins [mailto:ve7cc at shaw.ca]
> > Verzonden: maandag 5 juli 2004 00:21
> > Aan: Han Sytsma
> > Onderwerp: Re: [Dxspider-support] User Program
> >
> > Hi Han
> >
> > SH/DX/100 or SH/DX 100 both seem to work ok with Spider.
> > SH/MYDX does not work on your node but works on other Spider nodes.
> >
> > I have added SET/PAGE 0
> >
> > http://www.bcdxc.org/ve7cc/special/ve7cc.exe
> >
> > 73 Lee
> >
> > Han Sytsma wrote:
> > >
> > > Hi Lee,
> > >
> > > That one works except for sh/dx/100 Spider accepts only "sh/dx 100"
and
> of
> > > course you get the problem "press enter to continue" (in Dutch).
> > > Maybe you can avoid this by setting "set/page 0" at the login of the
> > program
> > > so paging is disabled when the user program is used.
> > > As far as I can see for now all screens are working properly, however
I
> > > didn't test filter settings yet.
> > >
> > > 73 Han
> > >
> > > -----Oorspronkelijk bericht-----
> > > Van: Lee Sawkins [mailto:ve7cc at shaw.ca]
> > > Verzonden: zondag 4 juli 2004 23:02
> > > Aan: Han Sytsma
> > > Onderwerp: Re: [Dxspider-support] User Program
> > >
> > > Sorry,
> > >
> > > should be http://www.bcdxc.org/ve7cc/special/ve7cc.exe
> > >
> > > Lee
> > >
> > > Han Sytsma wrote:
> > > >
> > > > Hi Lee,
> > > >
> > > > Are you shure that this is the right download location? I get this:
> > > >
> > > > spider >
> > > > <- SET/DX_ARPC ON
> > > > Ongeldige opdracht
> > > > spider >
> > > > <- SH/SUN
> > > > Location dd/mm/yyyy Rise Set
Azim
> > > Elev
> > > > PE1FAM Beilen 04/07/2004 03:16Z 20:01Z
319.9
> > > -5.2
> > > > spider >
> > > > DX de RV6YZ: 7078.3 UA6JR/3 RDA-TV-12
> > > 2043Z
> > > > <-
> > > > spider >
> > > >
> > > > First time I had to go to ve7cc/special/ve7cc.exe
> > > >
> > > > 73 Han
> > > >
> > > > -----Oorspronkelijk bericht-----
> > > > Van: Lee Sawkins [mailto:ve7cc at shaw.ca]
> > > > Verzonden: zondag 4 juli 2004 20:01
> > > > Aan: Han Sytsma
> > > > Onderwerp: Re: [Dxspider-support] User Program
> > > >
> > > > Hi Han.
> > > >
> > > > Uploaded a newer version. http://www.bcdxc.org/ve7cc/ve7cc.exe
> > > > Think it is ok.
> > > >
> > > > The Dutch only causes a problem for the "paging". It need to be
> > > > "set/page 0".
> > > >
> > > > 73 Lee
> > > >
> > > > Han Sytsma wrote:
> > > > >
> > > > > Hi Lee,
> > > > >
> > > > > Bad news:
> > > > > spider >
> > > > > <- SET/DX_ARPC ON
> > > > >
> > > > > It basicly returned to the previous state. Although logged in, the
> > user
> > > > > program is stating "login:" in the top green textbox.
> > > > > I left the internet port open so you can test on my callsign if
you
> > like
> > > > > (language I use for the cluster is Dutch, I do not know if this is
> > > causing
> > > > > the problem.
> > > > >
> > > > > 73 Han
> > > > >
> > > > > -----Oorspronkelijk bericht-----
> > > > > Van: Lee Sawkins [mailto:ve7cc at shaw.ca]
> > > > > Verzonden: zondag 4 juli 2004 07:56
> > > > > Aan: Han Sytsma
> > > > > Onderwerp: Re: [Dxspider-support] User Program
> > > > >
> > > > > Hi Han.
> > > > >
> > > > > Thanks for the offer. I will let you know.
> > > > >
> > > > > New trial version at http://www.bcdxc.org/ve7cc/ve7cc.exe
> > > > >
> > > > > This one should allow most filter settings to be done by point and
> > > > > click.
> > > > >
> > > > > Let me know if you see any problems.
> > > > >
> > > > > 73 Lee
> > > > >
> > > > > Han Sytsma wrote:
> > > > > >
> > > > > > Hi Lee,
> > > > > >
> > > > > > I downloaded the update, dx spots are comming in now, thanks for
> > that.
> > > > > > I don't know if you want to make the program in more languages
> (like
> > > > > Xastir,
> > > > > > and DX Spider), I could do a Dutch translation for you.
> > > > > >
> > > > > > 73 Han
> > > > > >
> > > > > > -----Oorspronkelijk bericht-----
> > > > > > Van: Lee Sawkins [mailto:ve7cc at shaw.ca]
> > > > > > Verzonden: zaterdag 3 juli 2004 22:20
> > > > > > Aan: Han Sytsma
> > > > > > Onderwerp: Re: [Dxspider-support] User Program
> > > > > >
> > > > > > Hi Han.
> > > > > >
> > > > > > Special version for you that works!
> > > > > >
> > > > > > http://www.bcdxc.org/ve7cc/special/ve7cc.exe
> > > > > >
> > > > > > It still is looking for "Press enter to continue" in English, so
> it
> > > > > > doesn't recognize the Dutch message.
> > > > > >
> > > > > > It also uses sh/mydx command which your node does not like.
> > > > > >
> > > > > > You may close the port now if you wish.
> > > > > >
> > > > > > 73 Lee
> > > > > >
> > > > > > Han Sytsma wrote:
> > > > > > >
> > > > > > > Hi Lee,
> > > > > > >
> > > > > > > It should now be open at port 8000, if you need anything else,
> let
> > > me
> > > > > know
> > > > > > >
> > > > > > > 73 Han
> > > > > > >
> > > > > > > -----Oorspronkelijk bericht-----
> > > > > > > Van: Lee Sawkins [mailto:ve7cc at shaw.ca]
> > > > > > > Verzonden: zaterdag 3 juli 2004 21:21
> > > > > > > Aan: Han Sytsma
> > > > > > > Onderwerp: Re: [Dxspider-support] User Program
> > > > > > >
> > > > > > > Please allow me to connect so I can see what is happening
> > > > > > >
> > > > > > > Lee
> > > > > > >
> > > > > > > Han Sytsma wrote:
> > > > > > > >
> > > > > > > > Hi Lee,
> > > > > > > >
> > > > > > > > PI8CDR-7 (or -8 my slackware test system) is at the moment
not
> > > open
> > > > > for
> > > > > > > > internet access, it can be reached through ampr.org at
> > 44.137.55.6
> > > > > port
> > > > > > > > 8000.
> > > > > > > >
> > > > > > > > If you want to test I can open up a port on my internet
router
> > at
> > > > > > > > www.pi8cdr.homelinux.org.
> > > > > > > >
> > > > > > > > For Charlie: I have DX spots on.
> > > > > > > >
> > > > > > > > 73 Han, PE1FAM
> > > > > > > >
> > > > > > > > -----Oorspronkelijk bericht-----
> > > > > > > > Van: dxspider-support-bounces at dxcluster.org
> > > > > > > > [mailto:dxspider-support-bounces at dxcluster.org] Namens Lee
> > Sawkins
> > > > > > > > Verzonden: zaterdag 3 juli 2004 10:38
> > > > > > > > Aan: dxspider-support at dxcluster.org
> > > > > > > > Onderwerp: Re: [Dxspider-support] User Program
> > > > > > > >
> > > > > > > > Thanks Dirk.
> > > > > > > >
> > > > > > > > Actuslly I have been using K1XX and a couple of other nodes
to
> > > test
> > > > my
> > > > > > > > program.
> > > > > > > >
> > > > > > > > I was trying to answer the question by Han, PE1FAM about how
> to
> > > make
> > > > > his
> > > > > > > > node (PI8CDR-7) compatible with my program. If he is seeing
> > > > > > > > "set/dx_arpc on", then my program is not detecting that he
is
> > > > running
> > > > > DX
> > > > > > > > Spider. All the nodes I have tested have "running DXSpider"
> in
> > > > their
> > > > > > > > login msg. This is what I have been using to detect that
the
> > node
> > > > is
> > > > > > > > Spider. My program thinks his node is AR Cluster.
> > > > > > > >
> > > > > > > > Lee VE7CC
> > > > > > > >
> > > > > > > > Dirk Koopman wrote:
> > > > > > > > >
> > > > > > > > > On Sat, 2004-07-03 at 09:03, Dirk Koopman wrote:
> > > > > > > > > > If you are looking for DXSpiders to test against, I
> suggest
> > > you
> > > > > try
> > > > > > > any
> > > > > > > > > > of:
> > > > > > > > > >
> > > > > > > > > > telnet://gb7djk.dxcluster.net:7300
> > > > > > > > > > telnet://wr3d.dxcluster.net:7300
> > > > > > > > >
> > > > > > > > > oops: telnet://wr3d.dxcluster.net:7000
> > > > > > > > >
> > > > > > > > > > telnet: //gb7baa.com:7300
> > > > > > > > > >
> > > > > > > > > > Dirk
> > > > > > > > >
> > > > > > > > > --
> > > > > > > > > Please Note: Some Quantum Physics Theories Suggest That
When
> > the
> > > > > > > > > Consumer Is Not Directly Observing This Message, It May
> Cease
> > to
> > > > > > > > > Exist or Will Exist Only in a Vague and Undetermined
State.
> > > > > > > >
> > > > > > > > _______________________________________________
> > > > > > > > Dxspider-support mailing list
> > > > > > > > Dxspider-support at dxcluster.org
> > > > > > > > http://www.tobit.co.uk/mailman/listinfo/dxspider-support
More information about the Dxspider-support
mailing list