[Dxspider-support] Is there a way to

[Eric Carling]

He probably means UI-DX, an alternative to AGWCluster, found at  http://www
apritch.myby.co.uk/addon_agw.htm

 
-------Original Message------- 
From: T3
Date: 04/10/05 11:46:20
To: The DXSpider Support list
Subject: Re: [Dxspider-support] Is there a way to
 
UNIDX?
i tryed a google lookup nada..
 
Tony
 
 
 
 
ww1r at bellsouth.net wrote:
 
> *download unidx program and it will transmit the spots over the
> ax25port for you. ww1r*
>
>     ----- Original Message -----
>     *From:* Keith Hornyak <mailto:khornyak at comcast.net>
>     *To:* Eric Carling <mailto:ericc at metro800.co.uk> ; The DXSpider
>     Support list <mailto:dxspider-support at dxcluster.org>
>     *Sent:* Saturday, April 09, 2005 9:09 AM
>     *Subject:* Re: [Dxspider-support] Is there a way to
>
>     Accomplished all below but no activity on the Terminal screen - do
>     have the message in the Beacon.txt going out.  But nothing coming
>     in to DX Spider from the Telnet port is making it over to AGW
>     Cluster - says Cluster Idle - even though spots are coming in via
>     telnet...  I have something not properly configured - the TNC is
>     on port1 - as long as a user is connected to the cluster there are
>     RF spots going out.  Without an RF user, there are not spots being
>     broadcast.
>
>         ----- Original Message -----
>         *From:* Eric Carling <mailto:eric at g0cgl.f2s.com>
>         *To:* The DXSpider Support list
>         <mailto:dxspider-support at dxcluster.org>
>         *Sent:* Saturday, April 09, 2005 8:06 AM
>         *Subject:* Re: [Dxspider-support] Is there a way to
>
>         Launch AGWCluster and go to File>Properties.
>
>         On the Radio tab set the AGW port that connects AGWCluster to
>         your DXSpider - most likely the loopback port which you will
>         have defined in AGWPE (but depending on your
>         configuration, the local RF port could be used).
>
>         Set your callsign for AGWCluster (your call with or without
>         SSID depending on whether the call is already in use for
>         another AGW client or preferably the Cluster call with SSID so
>         that unconnected users can more readily identify the DX spot
>         beacon)
>
>         Set the Cluster call
>
>         Set the country prefix(es).
>
>         On the Options tab check Announce DX and uncheck Spell DX.
>
>         You can verify the operation by using the Terminal screen.
>
>
>         /-------Original Message-------/
>
>         /*From:*/ Keith Hornyak <mailto:khornyak at comcast.net>
>         /*Date:*/ 04/09/05 11:47:46
>         /*To:*/ The DXSpider Support list
>         <mailto:dxspider-support at dxcluster.org>
>         /*Subject:*/ Re: [Dxspider-support] Is there a way to
>
>         That's correct - good description - this way people don't have
>         to be 'connected' to the system to receive spots...
>         ----- Original Message -----
>         *From:* KC2CWT <mailto:kc2cwt at kc2cwt.net>
>         *To:* The DXSpider Support list
>         <mailto:dxspider-support at dxcluster.org>
>         *Sent:* Saturday, April 09, 2005 7:37 AM
>         *Subject:* RE: [Dxspider-support] Is there a way to
>
>         What are you trying to do , Send spot out over the Rf port
>         like a bacon ?
>
>         -----Original Message-----
>         *From:* dxspider-support-bounces at dxcluster.org
>         <mailto:dxspider-support-bounces at dxcluster.org>
>         [mailto:dxspider-support-bounces at dxcluster.org]*On Behalf Of
>         *Keith Hornyak
>         *Sent:* Friday, April 08, 2005 11:20 PM
>         *To:* The DXSpider Support list
>         *Subject:* [Dxspider-support] Is there a way to
>
>         Am running DX Spider on Win9x system with AGWPE.  I obtain DX
>         Spots via Internet; have a local RF Port.  Want to send spots
>         on that RF Port  even if no users connected on RF.  Have
>         downloaded AGWCluster but how do I configure it to send DX
>         spots even if no RF users connected?  Is this the correct
>         program?  I have AGWCluster interfaced - all it does is BEACON
>         (via the Beacon.txt).  Any ideas?
>
>        
------------------------------------------------------------------------
>         _______________________________________________
>         Dxspider-support mailing list
>         Dxspider-support at dxcluster.org
>         http://www.tobit.co.uk/mailman/listinfo/dxspider-support
>
>
>
>
>
>        
------------------------------------------------------------------------
>         _______________________________________________
>         Dxspider-support mailing list
>         Dxspider-support at dxcluster.org
>         http://www.tobit.co.uk/mailman/listinfo/dxspider-support
>
>    
------------------------------------------------------------------------
>     _______________________________________________
>     Dxspider-support mailing list
>     Dxspider-support at dxcluster.org
>     http://www.tobit.co.uk/mailman/listinfo/dxspider-support
>
>------------------------------------------------------------------------
>
>_______________________________________________
>Dxspider-support mailing list
&gt;Dxspider-support at dxcluster.org
>http://www.tobit.co.uk/mailman/listinfo/dxspider-support
>
>
 
_______________________________________________
Dxspider-support mailing list
Dxspider-support at dxcluster.org
http://www.tobit.co.uk/mailman/listinfo/dxspider-support
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tobit.co.uk/pipermail/dxspider-support/attachments/20050410/8e214703/attachment.html