[Dxspider-support] Client

[Peter Hallgarten]

Hi,

I use the following to connect on linux with ax25 in kernel.

In Ax25d.conf

This section placed just below interfaces

# 
# VK3AVE-4 connects to dx cluster
# 
[VK3AVE-4 VIA *]
# <peer> Win T1 T2 T3 IDLE  N2 <mode> <uid>  <exec> <argv[0]> [<args....>]
NOCALL   *   *  *  *    *   *    L
default  * * * * * *  - dxspider /spider/src/client client %u ax25 

This section in the <netrom>

<avedxc>
parameters     4 100 10  *   60  5
NOCALL   * * * * * *  L
default  * * * * * *  - dxspider /spider/src/client client %u ax25

73 de Peter VK3AVE


-----Original Message-----
From: dxspider-support-bounces at dxcluster.org
[mailto:dxspider-support-bounces at dxcluster.org] On Behalf Of Peter
Sent: Sunday, 25 December 2005 11:11 PM
To: The DXSpider Support list
Subject: [Dxspider-support] Client

Hi

Is there a way to use client on an ax25 node to a remote system with spider
running, without have to give you call again? On the remote system there in
no ax25 running

Localy you will config ax25d like:

default  * * * * * *  - sysop /spider/src/client client %u ax25

May client can do this when adding a ip, but found nothing in the manual

Season greetings!

Peter
PC2A



_______________________________________________
Dxspider-support mailing list
Dxspider-support at dxcluster.org
http://mailman.tobit.co.uk/mailman/listinfo/dxspider-support