[Dxspider-support] Question
Jose Robaina M. (YV5TX - 4M5R)
jose.yv5tx at gmail.com
Fri Sep 28 07:10:52 CEST 2007
Hi there guys
Maybe this topic was covered, but I don't get with the answer
I like to get severals conections with severals diferents nodes around the
world. But when I get conected with two or more of these, I generate a Feed
back spots (get the same spot on two nodes and show they on my own)
How I get this? for example: (ON0DXK-5)
Ave Obs Ping Sec Since
Callsign Type Started RTT count Int. Last Ping
4M5DX DXSP 28-Sep-2007 0450Z 4.55 2 300 36
DB0SPC-7 DXSP 28-Sep-2007 0205Z 0.17 2 300 34
ED7ZAB-5 DXSP 28-Sep-2007 0237Z 1.11 2 300 217
F6KCE-3 AK1A 10-Sep-2007 1025Z 0.74 2 300 242
HB9IAC-8 DXSP 3-Sep-2007 0902Z 0.16 2 300 130
IK4ICZ-6 DXSP 21-Sep-2007 0658Z 0.19 2 300 34
IK5PWJ-6 DXSP 27-Sep-2007 1140Z 0.12 2 300 33
ON0AN DXNT 25-Sep-2007 2201Z 0.09 2 300 212
OZ2DXC DXSP 26-Sep-2007 0048Z 0.13 2 300 157
PI4TUE-8 DXSP 26-Sep-2007 0520Z 0.09 2 300 35
S50CLX DXSP 26-Sep-2007 0606Z 0.18 2 300 271
YU0DXK DXSP 10-Sep-2007 1331Z 0.18 2 300 195
I'm using the crontab for example to check every 10 minutes to see if nodes
are connected and if not start a connect job going. Also if the main node
are connected, then disc the second one:
0,10,20,30,40,50 * * * * start_connect('k1ttt') unless connected('k1ttt')
1,11,21,31,41,51 * * * * start_connect('on0dxk-5') unless
connected('on0dxk-5')
2,12,22,32,42,52 * * * * disconnect('on0dxk-5') if connected('k1ttt')
I like to get a several connections but with a "filter" information to don't
get a Feed Back. How I can get it????
I'm using DX-spider 1.52 Build 61.532
Thanks for help in advance
Jose YV5TX
SysOp 4M5DX Cluster Node
4m5dx.no-ip.org at 7300
More information about the Dxspider-support
mailing list