[Dxspider-support] DX Cluster filter syntax

[Henk Remijn PA5KT]

Looks like you want spots from the USA.

I would suggest this:
accept/spot call_dxcc 226 on 14000/14060

You can find the dxcc number with the show/prefix command.

sh/prefix  k
K DXCC: 226 ITU: 7 CQ: 4 LL: 43 0 N 87 54 W (K, United-States-K)

73 Henk PA5KT

Tom Vavra schreef:
> Keith
>
> try a single filter
>
> accept/spot call k,w,n,a on 14000/14060
>
>         Tom    WB8ZRL
>
> ----- Original Message ----- 
> From: "GU6EFB" <gu6efb at cwgsy.net>
> To: "'The DXSpider Support list'" <dxspider-support at dxcluster.org>
> Sent: Saturday, February 16, 2008 3:43 PM
> Subject: [Dxspider-support] DX Cluster filter syntax
>
>
>   
>> I do have one question which I don't and don't understand what is
>>     
> happening
>   
>> with the filter I have read the filter guide and I think I have things set
>> correctly.
>>
>> Any help would be much appreciated
>>
>>
>> show/filter
>> GU6EFB : spots
>>  filter0 accept freq 14000/14060
>>  filter1 accept call k,w,n,a
>> GU6EFB de GB7DXG-1 16-Feb-2008 1508Z 2.3365  dxspider >
>> DX de WB0RUR:    14040.0  V31UZ                              1508Z
>> DX de K1TTT:     21032.2  KP2M                               1506Z FN32
>>
>>
>> show/filter
>> GU6EFB : spots
>>  filter1 accept call k,w,n,a
>> GU6EFB de GB7DXG-1 16-Feb-2008 1512Z 2.3365  dxspider >
>> DX de S55A:      14065.0  W1CSM                               1513Z
>> DX de IO4T:      21006.7  W2FU                                1513Z JN54
>> DX de LY6A:      14048.0  W3PP                                1512Z
>> DX de TM6M:      21001.1  K3LR                                1513Z
>> DX de UA6AA:     14004.1  W2CG                                1513Z KN95
>> DX de LY6A:      14048.3  K1KP                                1512Z
>>
>>
>> sh/filter
>> GU6EFB : spots
>>  filter0 accept freq 14000/14060
>> GU6EFB de GB7DXG-1 16-Feb-2008 1516Z 2.3365  dxspider >
>> DX de K2ONP:     14039.4  SV6CZQ                         1516Z FN32
>> DX de K9IMM:     14033.2  DL1YD                          1516Z EN52
>> DX de UA6AA:     14004.9  K1TTT                          1516Z KN95
>> DX de W0RSR:     14047.1  LY8O                           1516Z
>>
>>
>>
>> If I have just one filter filtering frequency then that works fine and I
>> get my 20m CW nicely.
>> If I have just "accept/spot call k,w,n,a" then I get all the American
>> traffic which is fine too.
>>
>> But if I combine the two together as listed above, the filter seems to
>> do a wobbly neither of the traffic is filtered as you can above taken
>> from the cluster.
>>
>> Cheers,
>>
>> Keith GU6EFB sysop GB7DXG-1
>>
>>
>>
>>     
>
>