[Dxspider-support] APRS DXSpider identifier

[Danilo Brelih]

Dirk

Would be possible to implement some code for sending Spider DXCluster position
to the APRS-IS network and show our station information on Google APRS tracker
map http://en.aprs.fi/ Some configuration variables would be needed instead.

CUL Dan, S50U @ S50CLX


CALL=S50CLX-% # aprs symbol for dxcluster is %

LATPOSITION=13.59.15E # The latitude of the station position

LONPOSITION=46.07.46N # The longitude of the station position

APRSSERVERLIST=euro.aprs2.net:14580 # if your location is in Europe
#APRSSERVERLIST=noam.aprs2.net:14580 # North America
#APRSSERVERLIST=asia.aprs2.net:14580 # Asia
#APRSSERVERLIST=soam.aprs2.net:14580 # South America and Africa
#APRSSERVERLIST=aunz.aprs2.net:14580 # Australia and New Zealand

FREQ=434.400 # RF DX Cluster access frequency

TXPOWER=5 # TX output is 5 watts

ANTENNAGAIN=5 # antenna gain is 5 dBd

ANTENNAHIGHT=35 # 35 meters above the ground

ANTENNADIR=-1 # an omni is used when -1 otherwise 180 for beam direction in deg.

BEACONINTERVAL=10 # APRS beacon will be sent to network every 10 minutes

APRSPATH=WIDE1-1 # forwarding beacon inside the APRS network

COMMENT=http://s50clx.infrax.si Spider DXCluster running on Ubuntu 8.10 Linux


-- 
Linux is like living in a teepee. No Windows, no Gates and an Apache in house!
http://s50u.s50e.si