[Dxspider-support] Auto start second cluster

[Bob Nielsen]

The "normal" (per the documentation) setup has a symbolic link between /home/sysop/spider and /spider.

On Nov 3, 2011, at 4:21 PM, Jim Bayer wrote:

> In inittab the line:
> 
> dx1:235:respawn:/bin/su -c "/usr/bin/perl -w /spider/perl/cluster.pl"
> 
> Indicates the cluster is in /spider/perl.  You said it was in
> /home/sysop/spider.  I'm confused that this works at all....
> 
> Jim
> kc9aop/kc9aop-1
> 
> -----Original Message-----
> From: dxspider-support-bounces at dxcluster.org
> [mailto:dxspider-support-bounces at dxcluster.org] On Behalf Of Peter
> Sent: Thursday, November 03, 2011 3:04 PM
> To: The DXSpider Support list
> Subject: [Dxspider-support] Auto start second cluster
> 
> Hi
> 
> Sorry that I come back with the same question of " How to auto start a
> second cluster"
> April 2010 I had the same question and I got I working.
> But now the second cluster refuse to start.
> 
> Cluster 1 is running as sys op (home/sysop) and the second as sysop2
> (home/sysop2)
> Manual starting the second cluster via
> /home/sysop2/spider/perl/cluster.pl will bring up the cluster.
> 
> DXSPIDER_ROOT is correct:
> sysop2 at pi4cc:~$ echo $DXSPIDER_ROOT
> /home/sysop2/spider
> sysop2 at pi4cc:~$
> 
> In /etc/inittab I have the 2 lines:
> dx1:235:respawn:/bin/su -c "/usr/bin/perl -w /spider/perl/cluster.pl" 
> sysop >/dev/null
> dx2:235:respawn:/bin/su -c "DXSPIDER_ROOT=/home/sysop2 /usr/bin/perl -w
> /home/sysop2/spider/perl/cluster.pl" sysop2 >/dev/null
> 
> Yes I do telinit q after changes
> DX1 is autostarting and DX2 refuses.
> Is there somewhere a log file of inittab with an output to see if there is
> any error?
> 
> What do I wrong?
> Running the system on a debian linux OS
> 
> Peter
> PC2A/PI4CC
> 
> 
> 
> _______________________________________________
> Dxspider-support mailing list
> Dxspider-support at dxcluster.org
> http://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
> 
> 
> _______________________________________________
> Dxspider-support mailing list
> Dxspider-support at dxcluster.org
> http://mailman.tobit.co.uk/mailman/listinfo/dxspider-support

_____
N7XY DX Cluster Node - telnet to n7xy.net, port 7300