[Dxspider-support] Colrdx vs telnet

[Jose Robaina M. (YV5TX)]

Thanks Dirk.

I don't have problems to connect daily from here using no-ip domain.

The IP not likely change unless the modem restart or the internet service
fail (very frecuently on venezuela).

We can test this new address... I'm happy to do it!!

-- 
@@@@@@@@@@@@@@@@@@@@@@@@
José Manuel Robaina M.
Mechanical Engineer
Ham call: YV5TX
Special call: YW5W - (ex 4M5R)
email: jose.yv5tx at gmail.com
Twitter: @yv5tx
Member of:
4M5DX Group - DXXE -- LoTW
DXCC - Croatian Telegraphy Club.
SysOp of 4M5DX Cluster node.
Telnet to 4m5dx.no-ip
org, port 7300
@@@@@@@@@@@@@@@@@@@@@@@@
El 10/6/2015 9:34, "Dirk Koopman" <djk at tobit.co.uk> escribió:

>  I think you need to review your connection and/or your router config .
> Because when I was testing, I too had intermittent problems connecting via
> the dns name. I didn't try the IP address.
>
> If the IP address is actually static and not likely to change, I can set
> you up as 4m5dx.dxcluster.net.
>
> (An offer which is open to any dxcluster, anywhere, regardless of software
> used)
>
> Dirk G1TLH
>
> On 10/06/15 14:34, José M. Robaina, YV5TX wrote:
>
>  Hello  again.
>
> The user tell me that he doesn’t have problems to connect to 4m5dx using
> the node dinamic IP instead of it’s domain...
>
> colrdx -c yy2jab 4m5dx.no-ip.org 7300
> colrdx: Can't connect: Network is unreachable
>
> colrdx -c yy2jab 190.72.100.31 7300
>  Connect
>
> colrdx -c yy2jab yv5aj.org 7000
> Connect
>
> Any suggestions?
>
>
>  --
> @@@@@@@@@@@@@@@@@@@@@@@@
> José Manuel Robaina M.
> Mechanical Engineer
> Ham call: YV5TX
> Special call: YW5W - (ex 4M5R)
> email: jose.yv5tx at gmail.com
> Twitter: @yv5tx
> Member of:
> 4M5DX Group - DXXE -- LoTW
> DXCC - Croatian Telegraphy Club
> 4m5dx DXCluster SysOp, telnet 4m5dx.no-ip.org port 7300
> @@@@@@@@@@@@@@@@@@@@@@@@
>
>  *From:* Dirk Koopman <djk at tobit.co.uk>
> *Sent:* Tuesday, June 09, 2015 5:30 AM
> *To:* The DXSpider Support list <dxspider-support at dxcluster.org>
> *Subject:* Re: [Dxspider-support] Colrdx vs telnet
>
>  I would guess (by reading the Fine Manual) that he is not including the
> port (in the correct [undocumented] form) on the command line.  The default
> port is 8000 (apparently).
>
> Dirk
>
> On 08/06/15 19:20, Jose Robaina M. (YV5TX) wrote:
>
> Hello my friends.
>
> I have some question about one cluster user. He tells me that cannot
> connect to our node using colrdx, but no problem using telnet. The program
> says "colrdx:can't connect: network is unreachable"
>
> I don't  know anything about colrdx or how can use it. Normally connect at
> node using putty or logger32 via telnet protocol on windows OS.
>
> Any suggestions or ideas?
>
> Best 73
>
> --
> @@@@@@@@@@@@@@@@@@@@@@@@
> José Manuel Robaina M.
> Mechanical Engineer
> Ham call: YV5TX
> Special call: YW5W - (ex 4M5R)
> email: jose.yv5tx at gmail.com
> Twitter: @yv5tx
> Member of:
> 4M5DX Group - DXXE -- LoTW
> DXCC - Croatian Telegraphy Club
> 4m5dx DXCluster SysOp, telnet 4m5dx.no-ip.org port 7300
> @@@@@@@@@@@@@@@@@@@@@@@@
>
>
> _______________________________________________
> Dxspider-support mailing listDxspider-support at dxcluster.orghttp://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
>
>
>  ------------------------------
> _______________________________________________
> Dxspider-support mailing list
> Dxspider-support at dxcluster.org
> http://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
>
>
> _______________________________________________
> Dxspider-support mailing listDxspider-support at dxcluster.orghttp://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
>
>
>
> _______________________________________________
> Dxspider-support mailing list
> Dxspider-support at dxcluster.org
> http://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.tobit.co.uk/pipermail/dxspider-support/attachments/20150610/370da7b0/attachment.html>