[Dxspider-support] DxSpider will not run
Dirk Koopman
djk at tobit.co.uk
Fri Aug 14 01:45:16 CEST 2020
What does git branch say?
struggling to think of anything other than your .git tree has got
corrupted. And it's past my bedtime.
Dirk
On 14/08/2020 00:21, Eddie Olson via Dxspider-support wrote:
>
> Using an RPI with a HDD
>
> Eddie
>
> Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for
> Windows 10
>
> *From: *Dirk Koopman via Dxspider-support
> <mailto:dxspider-support at tobit.co.uk>
> *Sent: *Friday, 14 August 2020 11:01 AM
> *To: *Eddie Olson via Dxspider-support
> <mailto:dxspider-support at tobit.co.uk>
> *Cc: *Dirk Koopman <mailto:djk at tobit.co.uk>
> *Subject: *Re: [Dxspider-support] DxSpider will not run
>
> Try git reset --hard and then the git describe thing again. If that
> doesn't work then you will need to follow the instructions for
> replacing the .git directory on the dxcluster.org download page.
>
> But, are you running on an RPi? Are you just using the SDCard? If so,
> has your card worn out? What does 'dmesg' or /var/log/syslog say? Any
> disk errors?
>
> Dirk
>
> On 13/08/2020 23:43, Eddie Olson via Dxspider-support wrote:
>
> Starting it up automatically as a service or trying to start it
> from cluster.pl gives the same result.
>
> If I type 'git describe --long' into a shell (in the /spider
> directory) I get
>
> error: Could not read b1f9b4650ed8fdeb1e03834f076f3040ce65776a
>
> fatal: No tags can describe
> 'cb319a377cdf61f610b57bb1336eba1b5873db2b'.
>
> Try --always, or create some tags.
>
> Eddie
>
> *From: *Dirk Koopman via Dxspider-support
> <mailto:dxspider-support at tobit.co.uk>
> *Sent: *Friday, 14 August 2020 10:30 AM
> *To: *Eddie Olson via Dxspider-support
> <mailto:dxspider-support at tobit.co.uk>
> *Cc: *Dirk Koopman <mailto:djk at tobit.co.uk>
> *Subject: *Re: [Dxspider-support] DxSpider will not run
>
> And it's been working and updating from git up until now?
>
> What happens if you type 'git describe --long' into a shell (in
> the /spider directory)?
>
> How are you starting it up? Are you in the /spider directory when
> you start it up?
>
> Dirk
>
> On 13/08/2020 23:22, Eddie Olson via Dxspider-support wrote:
>
> It was going ok then suddenly stopped
>
> Now when I try to start cluster all I get is
>
> (*) Perl path:
> .:/spider/local:/spider/perl:/spider/perl5lib:/etc/perl:/usr/local/lib/arm-linux-gnueabihf/perl/5.24.1:/usr/local/share/perl/5.24.1:/usr/lib/arm-linux-gnueabihf/perl5/5.24:/usr/share/perl5:/usr/lib/arm-linux-gnueabihf/perl/5.24:/usr/share/perl/5.24:/usr/local/lib/site_perl:/usr/lib/arm-linux-gnueabihf/perl-base
>
> describe --long: command returned error: 128
>
> This is the latest Mojo version
>
> Thanks
>
> Eddie Olson
>
> ZL2AQY
>
>
>
>
> _______________________________________________
>
> Dxspider-support mailing list
>
> Dxspider-support at tobit.co.uk <mailto:Dxspider-support at tobit.co.uk>
>
> https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
>
>
>
> _______________________________________________
>
> Dxspider-support mailing list
>
> Dxspider-support at tobit.co.uk <mailto:Dxspider-support at tobit.co.uk>
>
> https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
>
>
> _______________________________________________
> Dxspider-support mailing list
> Dxspider-support at tobit.co.uk
> https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.tobit.co.uk/pipermail/dxspider-support/attachments/20200814/97b5b0a5/attachment-0001.htm>
More information about the Dxspider-support
mailing list