[Dxspider-support] Init sequence with an isolated node

[IK5ZUK Luigi]

Hi Leo,
yes I've seen... and I'm very surprised !

It's very strange because on my node I have marked as isolated two other 
nodes (IK8HJC-6 running 0.82 and IK7NXU-6 running 0.203) and with both 
when the link starts the Ave RTT is 999.00 (in both side), after a few 
minutes the Ave RTT decrease to a normal value... I don't know why... 
Hope Dirk can gives some help and check the code !

Thank you Leo for your help !

73 Luigi IK5ZUK

Luigi - IK5ZUK
Qth: Pisa
Locator: JN53FQ
Mail: ik5zuk at tiscali.it

Il 17/02/2020 22.22, IZ5FSA via Dxspider-support ha scritto:
> It seems to be all ok!
>
> I've tried to UNSET/ISOLATE IK5ZUK-6 and it seems to be ok.
>
> 73 de Leo IZ5FSA
> MDXC#201 FT8MDC#7637
> QSL Bureau, Direct, ClubLog, LOTW, eQSL
> Il 17/02/2020 21:51, IK5ZUK Luigi via Dxspider-support ha scritto:
>> Leo,
>> let's now turn the situation around: your node IZ5FSA-6 isolated in 
>> my side, and my node IK5ZUK-6 unisolated in your side.
>>
>> Now the issue should come up!
>>
>> Please, let me/us know...
>>
>> 73 Luigi IK5ZUK
>>
>> Luigi - IK5ZUK
>> Qth: Pisa
>> Locator: JN53FQ
>> Mail: ik5zuk at tiscali.it
>> Il 17/02/2020 21.28, IK5ZUK Luigi via Dxspider-support ha scritto:
>>> Leo,
>>> now I try to remove the isolation for your node (unset/isolate 
>>> IZ5FSA-6) and will see what happens.
>>>
>>> 73 Luigi IK5ZUK
>>> Luigi - IK5ZUK
>>> Qth: Pisa
>>> Locator: JN53FQ
>>> Mail: ik5zuk at tiscali.it
>>> Il 17/02/2020 21.15, IZ5FSA via Dxspider-support ha scritto:
>>>> Hi Luigi
>>>> I've SET/SPIDER IK5ZUK-6 and SET/ISOLATE IK5ZUK-6
>>>> and started autoconnect telnet script...
>>>> 73 de Leo IZ5FSA
>>>> MDXC#201 FT8MDC#7637
>>>> QSL Bureau, Direct, ClubLog, LOTW, eQSL
>>>> Il 17/02/2020 19:48, IK5ZUK Luigi via Dxspider-support ha scritto:
>>>>> Hi Leo,
>>>>> Yes thanks, certainly !
>>>>>
>>>>> I've marked your node IZ5FSA-6 as spider node and also set as 
>>>>> isolated. You can connect to my node via telnet to ik5zuk.ddns.net 
>>>>> on port 8000.
>>>>>
>>>>> Please let me know... ok ?!?
>>>>>
>>>>> 73 Luigi IK5ZUK
>>>>>
>>>>> Luigi - IK5ZUK
>>>>> Qth: Pisa
>>>>> Locator: JN53FQ
>>>>> Mail: ik5zuk at tiscali.it
>>>>> Il 17/02/2020 19.42, IZ5FSA Leonardo via Dxspider-support ha scritto:
>>>>>> Do U wanna try ?
>>>>>>
>>>>>> Il Lun 17 Feb 2020, 19:14 IK5ZUK Luigi via Dxspider-support 
>>>>>> <dxspider-support at tobit.co.uk 
>>>>>> <mailto:dxspider-support at tobit.co.uk>> ha scritto:
>>>>>>
>>>>>>     Hello,
>>>>>>     did someone made some test to verify this issue ?
>>>>>>
>>>>>>     Please, let me know...
>>>>>>
>>>>>>     73 Luigi IK5ZUK
>>>>>>
>>>>>>     Luigi - IK5ZUK
>>>>>>     Qth: Pisa
>>>>>>     Locator: JN53FQ
>>>>>>     Mail: ik5zuk at tiscali.it <http://tiscali.it>
>>>>>>
>>>>>>     Il 14/02/2020 23.54, IK5ZUK Luigi via Dxspider-support ha
>>>>>>     scritto:
>>>>>>     > Hello the list,
>>>>>>     >
>>>>>>     > after updating my node to the mojo branch, it seems that the
>>>>>>     > initialization sequence with a parner node marked as
>>>>>>     isolated node, is
>>>>>>     > not working properly, in particular it seems that the PC92
>>>>>>     or the PC19
>>>>>>     > frame is not transmitted transmitted by the node where the
>>>>>>     partner is
>>>>>>     > marked as isolated. Furthermore, doing the "Who" command,
>>>>>>     the Ave RTT
>>>>>>     > value for that isolated node remains to 999.00 .
>>>>>>     >
>>>>>>     > With the "normal" 1.55 ver. build 0.204, the init sequence
>>>>>>     with an
>>>>>>     > isolated partner seems working well.
>>>>>>     >
>>>>>>     > Please, could someone who's running the spider 1.57 ver.
>>>>>>     build 148
>>>>>>     > verify this issue and let know ?
>>>>>>     >
>>>>>>     > Thank you in advance !
>>>>>>     >
>>>>>>     > 73 Luigi IK5ZUK
>>>>>>     >
>>>>>>
>>>>>>
>>>>>>     _______________________________________________
>>>>>>     Dxspider-support mailing list
>>>>>>     Dxspider-support at tobit.co.uk
>>>>>>     <mailto:Dxspider-support at tobit.co.uk>
>>>>>>     https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
>>>>>>
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> Dxspider-support mailing list
>>>>>> Dxspider-support at tobit.co.uk
>>>>>> https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Dxspider-support mailing list
>>>>> Dxspider-support at tobit.co.uk
>>>>> https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Dxspider-support mailing list
>>>> Dxspider-support at tobit.co.uk
>>>> https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
>>>
>>>
>>>
>>> _______________________________________________
>>> Dxspider-support mailing list
>>> Dxspider-support at tobit.co.uk
>>> https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
>>
>>
>> _______________________________________________
>> Dxspider-support mailing list
>> Dxspider-support at tobit.co.uk
>> https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
>
>
>
> _______________________________________________
> Dxspider-support mailing list
> Dxspider-support at tobit.co.uk
> https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.tobit.co.uk/pipermail/dxspider-support/attachments/20200217/561c10e2/attachment-0001.htm>