[Dxspider-support] sh/dx issue with my call

[rin JG1VGX]

Hi Kirill,

My node, running ver 1.57 build 338, is also fine with your call.
sh/dx r5acq
  7061.0  R5ACQ       27-Sep-2020 0602Z  WW RTTY                     <RV3ALD>
 14080.0  R5ACQ        3-Sep-2020 1112Z  FT4 -02dB from KO85 1190Hz
<SP8NFO>

But fails with
sh/dx oh/dl2sww
as Luigi reported.

Running DX Spider Cluster version 1.57 (build 338 git:
mojo/56526488[r]) on Linux
@ JG1VGX-9
telnet://5925.jp:7300

73 rin JG1VGX


On Tue, Sep 29, 2020 at 3:40 AM Libor Berka via Dxspider-support
<dxspider-support at tobit.co.uk> wrote:
>
> I have no problem on cluster telnet medvidek.ddns.net 7300
> with sh/dx r9acq. It is showing sh/dx r5acq
>    7061.0  R5ACQ       27-Sep-2020 0602Z  WW RTTY
> <RV3ALD>
>   14080.0  R5ACQ        3-Sep-2020 1112Z  FT4 -02dB from KO85 1190Hz
> <SP8NFO>
>
> 3
> Libor PY2ZEN
>
> On 9/28/20 11:58 AM, Kirill Ryabov via Dxspider-support wrote:
> > Hi sysops.
> > When I try sh/dx r5acq on pi4cc.nl node (DXSpider V1.57 build 338) I
> > got "sh/dx parse error 'ill' Invalid character in line"
> >
> > When I try to do the same on my own node r5acq.no-ip.org port 8000
> > (running DXSpider V1.55 build 0.185) I got nothing. Not list of spots
> > nor error message.
> >
> > Also when I try to log in to my node via telnet with my own callsign
> > 'r5acq' I could not do that. All can I get is only 'Connection lost'
> > message after some time. But everything's fine if I try to connect
> > with my old callsign.
> >
> > Does anybody have any idea what has happened to my callsign?
> >
> > Kirill
> > R5ACQ
> >
> > _______________________________________________
> > Dxspider-support mailing list
> > Dxspider-support at tobit.co.uk
> > https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
>
>
> _______________________________________________
> Dxspider-support mailing list
> Dxspider-support at tobit.co.uk
> https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support



--
73 rin JG1VGX