[Dxspider-support] cluster quit running

Sean Haga seanhaga at gmail.com
Wed Apr 28 02:27:41 CEST 2021 

/dev/root is full, looks like it is your root 8gb sd card?

From: Dxspider-support <dxspider-support-bounces at tobit.co.uk> on behalf of James Snider via Dxspider-support <dxspider-support at tobit.co.uk>
Reply-To: The DXSpider Support list <dxspider-support at tobit.co.uk>
Date: Tuesday, April 27, 2021 at 8:07 PM
To: The DXSpider Support list <dxspider-support at tobit.co.uk>
Cc: James Snider <jim at lexiann.com>
Subject: Re: [Dxspider-support] cluster quit running

Well tried some other things tonight when I got in.  So if I do a df, here’s what I get

pi at raspberrypi:~ $ df
Filesystem     1K-blocks    Used Available Use% Mounted on
/dev/root        8191416 8175032         0 100% /
devtmpfs          469544       0    469544   0% /dev
tmpfs             474152       0    474152   0% /dev/shm
tmpfs             474152   47860    426292  11% /run
tmpfs               5120       4      5116   1% /run/lock
tmpfs             474152       0    474152   0% /sys/fs/cgroup
/dev/mmcblk0p1     42702   23054     19648  54% /boot
tmpfs              94828       0     94828   0% /run/user/1000
pi at raspberrypi:~ $

So I tried to update my spider stuff, here’s the response

pi at raspberrypi:/spider $ sudo git reset --hard
fatal: Could not write new index file.
pi at raspberrypi:/spider $

Interesting.  So I tried to update the pi system, here’s the text

pi at raspberrypi:~ $ sudo apt update
Hit:1 http://archive.raspberrypi.org/debian stretch InRelease
Err:1 http://archive.raspberrypi.org/debian stretch InRelease
  Splitting up /var/lib/apt/lists/archive.raspberrypi.org_debian_dists_stretch_InRelease into data and signature failed
Get:2 http://raspbian.raspberrypi.org/raspbian stretch InRelease [15.0 kB]
Ign:2 http://raspbian.raspberrypi.org/raspbian stretch InRelease
Get:3 http://raspbian.raspberrypi.org/raspbian stretch Release [14.4 kB]
Err:3 http://raspbian.raspberrypi.org/raspbian stretch Release
  Error writing to output file - write (28: No space left on device) Error writing to file - write (28: No space left on device) [IP: 93.93.128.193 80]
Reading package lists... Error!
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: http://archive.raspberrypi.org/debian stretch InRelease: Splitting up /var/lib/apt/lists/archive.raspberrypi.org_debian_dists_stretch_InRelease into data and signature failed
E: The repository 'http://raspbian.raspberrypi.org/raspbian stretch Release<http://raspbian.raspberrypi.org/raspbian%20stretch%20Release>' does no longer have a Release file.
N: Updating from such a repository can't be done securely, and is therefore disabled by default.
N: See apt-secure(8) manpage for repository creation and user configuration details.
E: Write error - write (28: No space left on device)
E: IO Error saving source cache
E: The package lists or status file could not be parsed or opened.
pi at raspberrypi:~ $


So anyone know where I need to look now?


Thanks

Jim W8BS

James Snider
jim at lexiann.com<mailto:jim at lexiann.com>




On Apr 26, 2021, at 8:56 PM, James Snider via Dxspider-support <dxspider-support at tobit.co.uk<mailto:dxspider-support at tobit.co.uk>> wrote:

Well I finally got back to the hotel.  I stopped the dxspider service and tried to start the cluster from my terminal.  Here’s all it is doing:


$ ./cluster.pl
(*) Perl path: .:/spider/local:/spider/perl:/spider/perl5lib:/spider/perl5lib/lib/perl5/5.24.1/arm-linux-gnueabihf-thread-multi-64int:/spider/perl5lib/lib/perl5/5.24.1:/spider/perl5lib/lib/perl5/arm-linux-gnueabihf-thread-multi-64int:/spider/perl5lib/lib/perl5:/etc/perl:/usr/local/lib/arm-linux-gnueabihf/perl/5.24.1:/usr/local/share/perl/5.24.1:/usr/lib/arm-linux-gnueabihf/perl5/5.24:/usr/share/perl5:/usr/lib/arm-linux-gnueabihf/perl/5.24:/usr/share/perl/5.24:/usr/local/lib/site_perl:/usr/lib/arm-linux-gnueabihf/perl-base
(*) DXSpider V1.57, build 344 (git: mojo/5bbe803f[r]) started
(*) Copyright (c) 1998-2021 Dirk Koopman G1TLH
(*) loading prefixes ...
(*) US Database loaded



Jim W8BS


James Snider
jim at lexiann.com<mailto:jim at lexiann.com>




On Apr 26, 2021, at 11:02 AM, jim lexiann.com<http://lexiann.com/> via Dxspider-support <dxspider-support at tobit.co.uk<mailto:dxspider-support at tobit.co.uk>> wrote:

Disk space is fine.  I'm running it on a 1 TB USB drive.  DX Spider is the only thing running on this Pi.

I'll pull some of the logs tonight when I get back to the hotel and see what clues they may show.


Jim W8BS
________________________________
From: Dxspider-support <dxspider-support-bounces at tobit.co.uk<mailto:dxspider-support-bounces at tobit.co.uk>> on behalf of Mike McCarthy, W1NR via Dxspider-support <dxspider-support at tobit.co.uk<mailto:dxspider-support at tobit.co.uk>>
Sent: Monday, April 26, 2021 7:21 AM
To: dxspider-support at tobit.co.uk<mailto:dxspider-support at tobit.co.uk> <dxspider-support at tobit.co.uk<mailto:dxspider-support at tobit.co.uk>>
Cc: Mike McCarthy, W1NR <lists at w1nr.net<mailto:lists at w1nr.net>>
Subject: Re: [Dxspider-support] cluster quit running

Have you checked the most obvious things like running out of disk space
or are you running this on a flash card and seeing disk i/o or
filesystem errors on the console?

Mike, W1NR

On 4/25/2021 6:49 PM, James Snider via Dxspider-support wrote:
> Not sure what happened but my node w8bs has been running for months with no issues and now that I’m out of town working, it’s not running.  I restarted it and checked the status and it looks like it’s running but console won’t load.  see below
>
>
> Linux raspberrypi 4.19.66-v7+ #1253 SMP Thu Aug 15 11:49:46 BST 2019 armv7l
>
> The programs included with the Debian GNU/Linux system are free software;
> the exact distribution terms for each program are described in the
> individual files in /usr/share/doc/*/copyright.
>
> Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
> permitted by applicable law.
> Last login: Sun Apr 25 18:44:06 2021
> pi at raspberrypi:~ $ /etc/init.d/dxspider status
> ● dxspider.service - DXSpider DX Cluster node
>    Loaded: loaded (/etc/systemd/system/dxspider.service; enabled; vendor preset: enabled)
>    Active: active (running) since Sun 2021-04-25 18:44:01 EDT; 1min 32s ago
>  Main PID: 491 (perl)
>    CGroup: /system.slice/dxspider.service
>            └─491 perl /spider/perl/cluster.pl > /dev/null
>
> Apr 25 18:44:01 raspberrypi systemd[1]: Started DXSpider DX Cluster node.
> pi at raspberrypi:~ $ /spider/perl/console.pl
> pi at raspberrypi:~ $
>
>
>
> Jim W8BS
>
> James Snider
> jim at lexiann.com<mailto:jim at lexiann.com>
>
>
>
>
> _______________________________________________
> Dxspider-support mailing list
> Dxspider-support at tobit.co.uk<mailto:Dxspider-support at tobit.co.uk>
> https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
>

_______________________________________________
Dxspider-support mailing list
Dxspider-support at tobit.co.uk<mailto:Dxspider-support at tobit.co.uk>
https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
_______________________________________________
Dxspider-support mailing list
Dxspider-support at tobit.co.uk<mailto:Dxspider-support at tobit.co.uk>
https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support

_______________________________________________
Dxspider-support mailing list
Dxspider-support at tobit.co.uk<mailto:Dxspider-support at tobit.co.uk>
https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.tobit.co.uk/pipermail/dxspider-support/attachments/20210428/3d4f0bbf/attachment-0001.htm>

More information about the Dxspider-support mailing list