[Dxspider-support] Invalid callsign

[Kirill Ryabov]

Putty is working fine.

Thanks.

25.02.2021 21:35, Dirk Koopman via Dxspider-support пишет:
> I don't use windows telnet.
> 
> telnet pi4cc.nl 8000
> Trying 85.214.239.84...
> Connected to pi4cc.nl.
> Escape character is '^]'.
> login: r5acq
> Hello Kirill, this is PI4CC in Rotterdam area NL
> running DXSpider V1.57 build 338
> 
> *************************************************************
>   Direct access to the dx-cluster: telnet dxc.pi4cc.nl:8000
>   Don't use the IP address, this can change without  notice!
> 
>   Bad configured connections will be blocked automatically
>   by a script for 10 minutes!
>   If so, check your settings and  use a different SSID
>   like <call>-1 for more than one connection.
> 
>   Need more info about PI4CC? -> Visit www.pi4cc.nl
> *************************************************************
> 
> *Echoing is currently disabled, set/echo to enable
> Nodes: 31/453 Clr - Users: 109/5308 Clr Max: 228/7705 Clr - Uptime:  38d 
> 18h 30m
> R5ACQ de PI4CC 25-Feb-2021 1832Z 2.4441  dxspider >
> b
> #Connection closed by foreign host.
> 
> Moral: don't use (your version of) windows telnet. As Ian says: use 
> putty or puttytel
> 
> 73 Dirk G1TLH
> 
> On 25/02/2021 16:34, Ian Maude via Dxspider-support wrote:
>> What do you mean by a Windows 10 telnet client? Putty?
>>
>> Ian
>>
>> On 25 Feb 2021 at 16:13:40, Kirill Ryabov via Dxspider-support 
>> <dxspider-support at tobit.co.uk <mailto:dxspider-support at tobit.co.uk>> 
>> wrote:
>>
>>     Hi lads.
>>     I have an issue with my callsign as discribed in that thread
>>     https://mailman.tobit.co.uk/pipermail/dxspider-support/2020-September/014707.html
>>     <https://mailman.tobit.co.uk/pipermail/dxspider-support/2020-September/014707.html>
>>
>>     It is still exists. I tried to connect to pi4cc.nl
>>     <http://pi4cc.nl> node with my call
>>     (r5acq) using windows 10 telnet client and got that:
>>
>>     login: r5acq Sorry R5ACQ is an invalid callsign/
>>
>>     There is no matter which DXSpider version is running (mojo or not).
>>
>>     What does it mean?
>>
>>     In the same time if I connect to any node (including my own
>>     r5acq.no-ip.org <http://r5acq.no-ip.org> port 8000) from for
>>     expamle N1MM+ or MixW everything is
>>     fine and I can connect to it.
>>
>>     Any ideas?
>>
>>     73
>>     Kirill
>>     R5ACQ
>>
>>
>>
>>     _______________________________________________
>>     Dxspider-support mailing list
>>     Dxspider-support at tobit.co.uk <mailto:Dxspider-support at tobit.co.uk>
>>     https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
>>     <https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support>
>>
>>
>> _______________________________________________
>> Dxspider-support mailing list
>> Dxspider-support at tobit.co.uk
>> https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
> 
> 
> _______________________________________________
> Dxspider-support mailing list
> Dxspider-support at tobit.co.uk
> https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
>