[Dxspider-support] IW2NOY-2 and PC92 - Solved

[Rene Olsen]

Hi.

I have seen it on my node as well (at least before I upgraded to mojo, so don't know if it is still 
that way).

Suddenly I see 1 or 2 nodes on my link list that I know nothing about at all.

Imo nothing should be able to get on the links list, without me doing a set/something.

The few times it has happened, I have made a set/lockout <callsign>

Actually thought that all known nodes were set as locked out, until the sysop did a 
set/something.

This seems to be the way this PC92 stuff is happening, as far as I can tell.

I don't want any node to show up on my link list unless I have approved it. Until then they 
should just be locked out.

Vy 73 de René / OZ1LQH


On 24 Dec 2022 at 17:38, Keith Maton via Dxspider-supp wrote:

> Thank you Graziano,
> 
> I have unlocked you so you should be able to reconnect to me now.
> 
> 73 Keith G6NHU
> 
> 
> > On 24 Dec 2022, at 10:42, Graziano Roccon (IW2NOY) via Dxspider-support <dxspider-support at tobit.co.uk> wrote:
> > 
> > Hello,
> > 
> > still IW2NOY here.
> > In effect the problem was the LZ7A node cluster connected on my node.
> > They connected to my node without never advised me.
> > I disconnected the LZ7A node and my log become clean, so i correctly set the LZ7A node like an AK1A node and this seems to solved the problem.
> > Now LZ7A is connected and nothing is happen and the log is clean with normal infos.
> > Seems that the node LZ7A connected automatically my node continuously.
> > In any case, setting the right configuration node seems to solved the problem.
> > 
> > I am really sorry for the mistake but is not my fault and i was not aware about the LZ7A connecting on me and with a different type of node.
> > 
> > Hope everithing is ok now.
> > 
> > Happy Christmas to all and happy new year.
> > Good DX !
> > 
> > 73's de IW2NOY
> > 
> > 
> > Il 24/12/2022 11:19 Graziano Roccon (IW2NOY) ha scritto:
> >> Hello,
> >> IW2NOY here, it's not my fault or my cluster node working bad.
> >> It seems a that in the half of this weeke something is changed in the
> >> node LZ7A connected to my node and my node is not understanding the
> >> communication received, maybe they changed the node type that now
> >> seems to be an AK1A.
> >> I am trying to solve the problem but i cannont change the node type
> >> while the node type LZ7A is connected.
> >> In any case, i am not connected to LZ7A, is LZ7A that is connected to
> >> me and i didn't know about that.
> >> This problem is also causing my log become larger.
> >> Be patience, i am trying to find a solution now.
> >> thanks, Graziano IW2NOY
> >> Il 24/12/2022 02:28 IW2NOY - Ham Radio Website ha scritto:
> >>> This is a response sent by Bob (Boudewijn) using the feedback form on
> >>> the website. The details of the message follow below:
> >>> Name: Bob (Boudewijn)
> >>> Email: ve3tok at rac.ca
> >>> Regarding:
> >>> comments:
> >>> Your dx spider node IW2NOY-2 seems to overrun the network with PC92
> >>> packets, what gives problems, maybe you can check. (Friday, Dec 23,
> >>> 20:27 EST local time) Many thanks & 73, Bob (Boudewijn) VE3TOK
> >>> You can use this link to reply: ve3tok at rac.ca
> > 
> > _______________________________________________
> > Dxspider-support mailing list
> > Dxspider-support at tobit.co.uk
> > https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
> 
> 
> _______________________________________________
> Dxspider-support mailing list
> Dxspider-support at tobit.co.uk
> https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support