[Dxspider-support] Error

[Howard Leadmon]

   As mentioned by others, you just need to do a '*set/spider WB3FFV-2*' 
on your node, and have a connect script that looks like:

*timeout 15**
**abort (Busy|Sorry|Fail)**
**connect telnet dxc.leadmon.net 7300**
**'login' 'kb5wck-2'*


  After that, if you just connect to wb3ffv-2 it should work, I know 
your set right over here.


73's and good luck..

---
Howard Leadmon -howard at leadmon.net
PBW Communications, LLC
http://www.pbwcomm.com

On 5/25/2022 10:25 AM, Jeff Grantham wrote:
> I did.  It was a typo in the email.
> ------------------------------------------------------------------------
> *From:* Howard Leadmon <howard at leadmon.net>
> *Sent:* Wednesday, May 25, 2022 09:23
> *To:* The DXSpider Support list <dxspider-support at tobit.co.uk>; 
> Yiannis Panagou <sv5fri at gmail.com>
> *Cc:* Jeff Grantham <jeff at kb5wck.com>
> *Subject:* Re: [Dxspider-support] Error
>  I hope you did WB3FFV, and not WB3FVV, or you have a typo in your 
> config..
>
>
> ---
> Howard Leadmon -howard at leadmon.net  <mailto:howard at leadmon.net>
> PBW Communications, LLC
> http://www.pbwcomm.com  <http://www.pbwcomm.com>
>
> On 5/25/2022 9:56 AM, Jeff Grantham via Dxspider-support wrote:
>> Yes I did set/spider wb3fvv-2.
>>
>> 73,
>> KB5WCK
>>
>>
>> ------------------------------------------------------------------------
>> *From:* Dxspider-support <dxspider-support-bounces at tobit.co.uk> 
>> <mailto:dxspider-support-bounces at tobit.co.uk> on behalf of Yiannis 
>> Panagou via Dxspider-support <dxspider-support at tobit.co.uk> 
>> <mailto:dxspider-support at tobit.co.uk>
>> *Sent:* Wednesday, May 25, 2022 8:54:56 AM
>> *To:* The DXSpider Support list <dxspider-support at tobit.co.uk> 
>> <mailto:dxspider-support at tobit.co.uk>
>> *Cc:* Yiannis Panagou <sv5fri at gmail.com> <mailto:sv5fri at gmail.com>
>> *Subject:* Re: [Dxspider-support] Error
>> Please one more could cou please post us the DXVars.pm configuration file
>>
>>
>>
>> ---
>> 73 Yiannis, SV5FRI
>> http://www.sv5fri.eu <http://www.sv5fri.eu>
>> DxCluster: dxc.sv5fri.eu:7300
>>
>> ------ Original Message ------
>> From: "Jan via Dxspider-support" <dxspider-support at tobit.co.uk 
>> <mailto:dxspider-support at tobit.co.uk>>
>> To: "Jeff Grantham via Dxspider-support" 
>> <dxspider-support at tobit.co.uk <mailto:dxspider-support at tobit.co.uk>>
>> Cc: "Jan" <cluster at pa4jj.nl <mailto:cluster at pa4jj.nl>>
>> Sent: 25/05/2022 4:52:50 μμ
>> Subject: Re: [Dxspider-support] Error
>>
>>> Did you do set/spider WB2FFV-2  ??
>>>
>>>
>>> Op 25-5-2022 om 15:36 schreef Jeff Grantham via Dxspider-support:
>>>> I get the following:
>>>>
>>>> WB3FFV-2 login: Sorry PC17^KB5WCK^KB5WCK-2^H25^ is an invalid callsign
>>>>
>>>>
>>>> Any ideas what is going on and how to fix it?  I get this for every 
>>>> spider I have setup.
>>>>
>>>> 73,
>>>> KB5WCK
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Dxspider-support mailing list
>>>> Dxspider-support at tobit.co.uk  <mailto:Dxspider-support at tobit.co.uk>
>>>> https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support  <https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support>
>>>
>>> -- 
>>> 73
>>> Jan
>>> PA4JJ
>>> ______________________________________________________
>>>
>>> My dxspider clusters running 24/7 on a raspberry pi 2
>>> pa4jj-2 telnet 77.174.195.163 port 7300
>>> pa4jj-3 telnet 77.174.195.163 port 7388
>>
>> _______________________________________________
>> Dxspider-support mailing list
>> Dxspider-support at tobit.co.uk  <mailto:Dxspider-support at tobit.co.uk>
>> https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support  <https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.tobit.co.uk/pipermail/dxspider-support/attachments/20220525/583db152/attachment.htm>