[Dxspider-support] Nodes disconnecting after upgrade

[Dirk Koopman]

This email trail (and some similar ones like it) fills me with a certain 
amount of disquiet. This is because I cannot reproduce the errors on my 
test node, nor on the four (large) nodes that I have oversight of. It 
leaves me feeling somewhat powerless to make suggestions and/or to fix 
it. Programs are not supposed to have minds of their own...

Dirk G1TLH

On 06/02/2023 13:49, Mike McCarthy, W1NR via Dxspider-support wrote:
> Do a 'set/spider w1nr' and see if it works.
>
> Mike, W1NR
>
> On 2/6/2023 6:25 AM, Kelly Leavitt via Dxspider-support wrote:
>> Just checked through the logs. No mention of permission denied. Any 
>> other thoughts? It seems like the cron is ignoring the 'unless 
>> connected', forcing a disconnect and then reconnecting.
>> ------------------------------------------------------------------------
>> *From:* Dxspider-support <dxspider-support-bounces at tobit.co.uk> on 
>> behalf of gu6efb--- via Dxspider-support <dxspider-support at tobit.co.uk>
>> *Sent:* Sunday, February 5, 2023 3:16 PM
>> *To:* 'The DXSpider Support list' <dxspider-support at tobit.co.uk>
>> *Cc:* gu6efb at cwgsy.net <gu6efb at cwgsy.net>
>> *Subject:* Re: [Dxspider-support] Nodes disconnecting after upgrade
>>
>> Hi Kelly
>>
>> Have a look in your debug log and see if you have any entries with 
>> permission denied, as after my upgrade I had a very similar issue and 
>> this was
>>
>> Due to some files not having the right permissions after the upgrade.
>>
>> It maybe something completely in your case but it’s someware to start.
>>
>> 73 Keith GU6EFB
>>
>> *From:*Dxspider-support <dxspider-support-bounces at tobit.co.uk> *On 
>> Behalf Of *Kelly Leavitt via Dxspider-support
>> *Sent:* 05 February 2023 19:41
>> *To:* Dxspider-support at tobit.co.uk
>> *Cc:* Kelly Leavitt <kelly at catcorner.org>
>> *Subject:* [Dxspider-support] Nodes disconnecting after upgrade
>>
>> I have a cron job set up that is like this:
>>
>> 3,8,13,18,23,28,33,38,43,48,53,57 * * * * start_connect('w1nr') 
>> unless connected('w1nr')
>>
>> At every time in the cron job, w1nr is disconnected and re-connected. 
>> I don't recall it working like this.
>>
>> As it stands now, I never have more than 2 nodes connected at any 
>> time. What is best practice?
>>
>> Thanks and 73 de Kelly, KE2L
>>
>>
>> _______________________________________________
>> Dxspider-support mailing list
>> Dxspider-support at tobit.co.uk
>> https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
>
> _______________________________________________
> Dxspider-support mailing list
> Dxspider-support at tobit.co.uk
> https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support