[Dxspider-support] No spots being recieved
James Snider
jim at lexiann.com
Sat Feb 18 01:26:52 GMT 2023
So do
set/user w8bs
set/spider w8bs-2
Now, what url can I use to telnet to you?
Jim W8BS
On Feb 17, 2023, at 8:19 PM, Terry Hunt via Dxspider-support <dxspider-support at tobit.co.uk> wrote:
K4HNT-2 is my node call
Thanks,
Terry Hunt
Terry at thenuttyhunt.house
Amateur Call: K4HNT
On Feb 17, 2023, at 8:17 PM, James Snider via Dxspider-support <dxspider-support at tobit.co.uk> wrote:
What call are you using to connect to me?
I just set both k4hnt and k4hnt-2 to spider node
Jim W8BS
On Feb 17, 2023, at 8:04 PM, Terry Hunt via Dxspider-support <dxspider-support at tobit.co.uk> wrote:
Ok, im an idiot
Forgot the cluster automatically setup as a service….
I just issued the connect w8bs command Jim
Log now shows
1676682003^DXProt^W8BS connected from 78.129.135.40
1676682004^DXProt^W8BS Disconnected
No spots are coming through
Terry
Thanks,
Terry Hunt
Terry at thenuttyhunt.house
Amateur Call: K4HNT
On Feb 17, 2023, at 7:56 PM, Terry Hunt via Dxspider-support <dxspider-support at tobit.co.uk> wrote:
Right this minute I rebooted and now when I issue ./cluster.pl it simply returns to the command line :(
Looks like I have some sort of issue elsewhere now
Thanks,
Terry Hunt
Terry at thenuttyhunt.house
Amateur Call: K4HNT
On Feb 17, 2023, at 7:53 PM, James Snider via Dxspider-support <dxspider-support at tobit.co.uk> wrote:
You sure it’s me? I don’t see you on mine now. Last log entry for you was the 16th
6Feb2023 at 01:25:01 PC92A K4HNT-2 -> 24.211.212.221 on G6NHU-2
16Feb2023 at 01:36:07 K4HNT-2 Disconnected
What address would I use to connect to you from here?
Jim W8BS
On Feb 17, 2023, at 7:45 PM, Terry Hunt via Dxspider-support <dxspider-support at tobit.co.uk> wrote:
You are one of the ones im getting the “already connected on another port” message.
Thanks,
Terry Hunt
Terry at thenuttyhunt.house
Amateur Call: K4HNT
On Feb 17, 2023, at 7:37 PM, Terry Hunt via Dxspider-support <dxspider-support at tobit.co.uk> wrote:
So during the course of upgrading I ran into some issues and ended up starting over…was a much easier install!!
But starting over means setting my connections back up, which I have done and I see 2 issues
1. At least one of my connections still has me connected on another channel. Don’t these time out?
2. I am connecting successful to at least 2 peers but no spots are coming through. I am assuming I missed something in the setup, I did a set/spider <node> followed by a connect <node>
Any ideas?
Terry
Thanks,
Terry Hunt
Terry at thenuttyhunt.house
Amateur Call: K4HNT
_______________________________________________
Dxspider-support mailing list
Dxspider-support at tobit.co.uk
https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
_______________________________________________
Dxspider-support mailing list
Dxspider-support at tobit.co.uk
https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
_______________________________________________
Dxspider-support mailing list
Dxspider-support at tobit.co.uk
https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
_______________________________________________
Dxspider-support mailing list
Dxspider-support at tobit.co.uk
https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
_______________________________________________
Dxspider-support mailing list
Dxspider-support at tobit.co.uk
https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
_______________________________________________
Dxspider-support mailing list
Dxspider-support at tobit.co.uk
https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
_______________________________________________
Dxspider-support mailing list
Dxspider-support at tobit.co.uk
https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.tobit.co.uk/pipermail/dxspider-support/attachments/20230218/0b14e1a0/attachment-0001.htm>
More information about the Dxspider-support
mailing list