[Dxspider-support] New build 532

[Kin]

Hi to all,

I've just been informed by the Telegram bot that we have a new build in
Mojo: 532
This is what Dirk has done:

27Mar24=====================================================================
=
1. Fix dupe PC[16]1 (spot) coming in "too fast" for dupe filter to work.

   Probably.
25Mar24=====================================================================
=
1. Make talk work. Note: this now works as the mojo branch originally
   expected - which means that it may (and likely will) flood route talks
   where the callsign that you want to talk to does not have a route to
   both the callsign and any nodes that it may be connected to.
22Mar24=====================================================================
=
1. Change the processing of trailing callsigns slightly so that /1 /2 etc
are
   retained, but the /P /M /A /MM etc are removed.
20Mar24=====================================================================
=
1. Has it really been so long since the last update?
2. Since forever, mainly because filtering was done very early on in
   DXSpider's development, clearing a filter needed a disconnect/reconnect
   cycle from the user/node to activate. Now clearing or changing a filter
is
   immediately effective in the current session.

   Also things like: 'rej/spot user_default on vhf' will immediately apply
   to all users that do not already have some other filter in place. Users
   can override this by setting a filter.

   The Filter system will now show the actual token that a faulty command
   dislikes.
3. Disable the "is there a route to callsign X3XXX" test in talk. This is a
   legacy test that should not apply at the user level. The resulting PC93
is
   flood routed unless there is a genuine direct route to that callsign.

Take the opportunity to upgrade to Mojo!!!

73 de Kin EA3CV

Sysop EA3CV-2, EA4URE2, 3 & 5