[Dxspider-support] Node pairs that never connect

[Kin]

Hi,

The following list shows nodes that are trying to establish a connection
with another node (possibly their partner), but are unsuccessful.
You can clearly see that the attempts respond to a cadence defined in your
crontab.
It is possibly a misconfiguration in your connection, or that the pair is
not well defined or is blocked.
This generates unwanted traffic that will be generated ad infinitum.
It is important to verify that the connections are established and
maintained, at least for a few minutes.
Not all of them are there, just some. Those that do not use pc9x, will not
appear.

CS5ARTD-2 to CT2IWWW-2
DO5SSB-2 to EA4URE-2
F1FCA-2 to PA4JJ-3
F1FCA-2 to SV5FRI-2
F4EYQ-1 to N6WS-6
F4IAA-3 to CT1EBQ-9
HG8PRC to HB9ON-9
IQ8DO-6 to IK5ZUK-6
JE3YEK to JA2YYYF-9
KB3CMT-2 to GB7VAX
KY9J-2 to VK5GR
KY9J-2 to VE2PKT
PY1NB-4 to N6WS-6
R2AKT-9 to R2DGO-1
R2DGO-1 to OP0P
SV1IW-9 to M0KGX-3
SV2HRT-1 to CT1EBQ-9
SV2HRT-1 to HB9VQQ-2
TA2NC to IK7IMO-6
WB3FFV-2 to HB9DRV-9
WB3FFV-2 to VE6CIC-1

If you could check your configurations, I would appreciate it.

Merry christmas.

Kin

EA3CV-2 dxcluster.cronux.net 7300
https://clustermap.cronux.net/map.html
https://clustermap.cronux.net/route_finder.html