[Dxspider-support] set/announce

[Faizul]

Hello again,
I need to know. why is my crontab not running?




On Thu, Mar 14, 2024 at 8:49 PM Mike McCarthy, W1NR via Dxspider-support <
dxspider-support at tobit.co.uk> wrote:

> There are two things you need to do. Go to /spider/msg and see if a file
> called forward.pl exists. You may need to copy forward.pl.issue to
> forward.pl. Edit the file and enter the callsigns of your connected
> partner nodes, NOT your own node call. I attached my w1nr-9 node file as
> an example. Then do load/forward on your console.
>
> When sending announce messages the command ANNOUNCE only goes to your
> local node. ANNOUNCE/FULL is propagated.
>
> On 3/14/2024 7:25 AM, Faizul via Dxspider-support wrote:
> > set/announce already set, but i cant send any announcement from my node
> > 9m2pju.hamradio.my <http://9m2pju.hamradio.my>. nothing showed to any
> > web dx cluster announcement list.
>
> --
> 73 de Mike, W1NR
>
> THAT was the equation. EXISTENCE!... SURVIVAL... must cancel out...
> programming!
>
> - Ruk -_______________________________________________
> Dxspider-support mailing list
> Dxspider-support at tobit.co.uk
> https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.tobit.co.uk/pipermail/dxspider-support/attachments/20240321/e4083ed4/attachment.htm>