[Dxspider-support] Incorrect node configurations (II)
Björn Ekelund
bjorn at ekelund.nu
Sun Nov 17 18:54:24 GMT 2024
I'm surprised to see SM7IUN. It should not exist. My nodes are SM7IUN-1,
-2, and -3.
Björn SM7IUN
On Sun, Nov 17, 2024 at 6:21 PM Kin via Dxspider-support <
dxspider-support at tobit.co.uk> wrote:
> Yes Dan, but not only the -32, -2 is a user.
>
> It would be advisable to do this:
>
>
>
> *disc IW1QLH-2*
>
> *set/user IW1QLH-2*
>
> *disc IW1QLH-32*
>
> *set/user IW1QLH-32*
>
>
>
> as they are not nodes, it does not affect and ensures that no erroneous
> data will be sent to the network.
>
> Also, there are nodes with PC9x disabled, and when they enable it, they
> will surely send erroneous information.
>
> I do not understand why those who can use PC9x do not do so. And to say
> that it's a bandwidth problem with the speeds given by the operators ???
>
> I advise to run:
>
>
>
> *set/wantPC9x*
>
>
>
> won't notice anything and will be visible to the rest of the network.
>
>
>
> 73 de Kin EA3CV
>
>
>
> _______________________________________________
>
>
>
> EA3CV-2 dxcluster.cronux.net 7300
>
> http://clustermap.cronux.net/map.html
>
>
>
>
>
>
>
> *De:* Dxspider-support <dxspider-support-bounces at tobit.co.uk> *En nombre
> de *Danilo Brelih via Dxspider-support
> *Enviado el:* domingo, 17 de noviembre de 2024 18:10
> *Para:* Kin via Dxspider-support <dxspider-support at tobit.co.uk>
> *CC:* Danilo Brelih <s50u at s50e.si>
> *Asunto:* Re: [Dxspider-support] Incorrect node configurations (II)
>
>
>
> Kin via Dxspider-support je 17.11.2024 ob 14:09 napisal:
>
>
>
> According to my knowledge IW1QLH-32 should be defined as user since it
> connects clusters every "x" minutes for his uptime statistics, see:
>
>
>
> http://www.hamcluster.net/
>
>
>
> CUL Dan S50U
>
>
>
>
>
> Hi,
>
>
>
> As an extension to my last message, here is a complete list of what can be
>
> seen yesterday, but only with pc9x, if you look at the nodes that don't have
>
> it enabled or implemented, there is even more.
>
>
>
> The list shows 'possible' errors in the definition of the partners. But it
>
> does not indicate which one is wrong.
>
>
>
> origin node partner nodes
>
> ----------- ---------------------
>
> CS5ARTD-2 SM7IUN SM7IUN-1
>
> CS5SEL-5 IW1QLH-2 IW1QLH-32
>
> CU3HY-2 SV5FRI SV5FRI-1
>
> CX2SA-8 IW1QLH-2 IW1QLH-32
>
> DB0ERF-5 F4BWT-3 F4BWT-7
>
> EA4FIT-2 EA4FIT EA4FIT-5
>
> GB7DJK DK7ET-4 DK7ET-5
>
> GB7NHR EA7URG EA7URG-5
>
> GB7NHR IW1QLH-2 IW1QLH-32
>
> GB7RAU IW1QLH-2 IW1QLH-32
>
> GB7VAX GB7DXG GB7DXG-1
>
> GB7VAX IW1QLH-2 IW1QLH-32
>
> HG8PRC R5ACQ-1 R5ACQ-3
>
> IK4ICZ-6 IW1QLH-2 IW1QLH-6
>
> IK5PWJ-6 IW1QLH-2 IW1QLH-32
>
> IK5ZUK-6 IK5PWJ-6 IK5PWJ-8
>
> IK6IHL-6 IW1QLH-2 IW1QLH-32
>
> IK6XMI-6 IW1QLH-2 IW1QLH-32
>
> IK7NXU-6 IW1QLH-2 IW1QLH-32
>
> IQ1LA-6 IW1QLH-2 IW1QLH-6
>
> IQ8PQ-6 N0VD N0VD-7
>
> IQ8RB-6 N0VD N0VD-7
>
> IU4QTF-9 IK4ICZ IK4ICZ-6
>
> IW1QLH-2 EA4URE-2 EA4URE-3
>
> IW1QLH-2 SM6HOC-2 SM6HOC-6
>
> IW1QLH-2 W1NR W1NR-9
>
> JH1RFM-9 IW1QLH-2 IW1QLH-6
>
> KF8I-3 F1FCA F1FCA-2
>
> KF8I-3 KB8PMY KB8PMY-3
>
> KF8I-3 W8BS W8BS-2
>
> KY9J-2 VE2PKT VE2PKT-9
>
> KY9J-2 VK5GR VK5GR-2
>
> N3BSQ-1 EA4FIT EA4FIT-2
>
> NA4DA-2 WA0O WA0O-9
>
> NL7S HI8S HI8S-8
>
> NX9G IW1QLH-2 IW1QLH-6 IW1QLH-32
>
> PA2SQ-1 PI1LAP PI1LAP-1
>
> PA4JJ-1 PA4JJ-2 PA4JJ-3
>
> PA4JJ-2 PA4JJ-1 PA4JJ-3
>
> PA4JJ-3 PA4JJ-1 PA4JJ-2
>
> PI1LAP-1 PI1LAP PI1LAP-2
>
> PI4NOS-1 HB9VQQ-2 HB9VQQ-3
>
> PY3NZ-8 IW1QLH-2 IW1QLH-6
>
> PY3NZ-8 PY4OG-2 PY4OG-4
>
> PY4OG-4 SM7IUN SM7IUN-1
>
> PY5JO-11 IW1QLH-2 IW1QLH-6 IW1QLH-32
>
> R2AKT-9 RA3ATX-8 RA3ATX-9
>
> S50DXS IW1QLH-2 IW1QLH-32
>
> SK3W-6 SM7IUN-1 SM7IUN-2
>
> SM7IUN-1 IW1QLH-2 IW1QLH-32
>
> SR4DXC F4GVE F4GVE-2
>
> SR4DXC PI1LAP PI1LAP-1
>
> VE3CGR-5 IW1QLH-2 IW1QLH-32
>
> VE3EY-7 SM7IUN-1 SM7IUN-2
>
> VE3ZIN-2 IW1QLH-2 IW1QLH-6
>
> VE6CIC-1 SV5FRI SV5FRI-1
>
> VE6CIC-1 WB3FFV WB3FFV-2
>
> W1DX IW1QLH-2 IW1QLH-32
>
> W1NR PA4JJ-2 PA4JJ-3
>
> W6RFU N6WS-2 N6WS-6
>
> W9TY-1 K4HNT-1 K4HNT-2
>
> WB3FFV-2 9M2PJU-1 9M2PJU-2
>
> WB3FFV-2 IW1QLH-2 IW1QLH-32
>
> YO2LOJ-2 N2YO-2 N2YO-4
>
>
>
> An example of what I mean is shown with the first one in the list:
>
>
>
> CS5ARTD-2 SM7IUN SM7IUN-1
>
>
>
> PC92^CS5ARTD-2^85800.02^A^^7SM7IUN:213.164.211.147^H94^
>
> PC92^SM7IUN-1^85799.02^A^^5CS5ARTD-2:65.109.3.118^H95^
>
>
>
> CS5ARTD-2 says it has SM7IUN connected as a node.
>
> On the other hand, SM7IUN-1 says that the node connected to it is CS5ARTD-2.
>
>
>
> From the above we can conclude that one of the two nodes has its partner
>
> configured incorrectly.
>
>
>
> If you can look at it and fix it, it would be very positive.
>
>
>
> Thanks for your help.
>
>
>
> 73 de Kin EA3CV
>
>
>
>
>
> -------------------------------------
>
>
>
> EA3CV-2 dxcluster.cronux.net 7300
>
> http://clustermap.cronux.net/map.html
>
>
>
>
>
> _______________________________________________
>
> Dxspider-support mailing list
>
> Dxspider-support at tobit.co.uk
>
> https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
>
>
>
> --
> S50CLX DX Cluster <https://s50clx.infrax.si>
> _______________________________________________
> Dxspider-support mailing list
> Dxspider-support at tobit.co.uk
> https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.tobit.co.uk/pipermail/dxspider-support/attachments/20241117/8f522656/attachment-0001.htm>
More information about the Dxspider-support
mailing list