[Dxspider-support] Partnes with connection problems

[Jan]

Make sure to connect to M0KGX-3 as follows:

timeout 15
connect telnet dx.m0kgx.com 7300

Note the node call is only m0kgx

In any case that is how I log in with pa4jj-3

73
Jan
PA4JJ


Op 7-1-2025 om 11:41 schreef Kin via Dxspider-support:
>
> Björn,
>
> Itseems that the problem is in M0KGX-3. Keep trying every 10 min 
> without success.
>
> Also, it's not only you, there are quite a few nodes with the same 
> problem:
>
> Node-1Node-2ConnDiscALL
>
> ----------------------------------------
>
> SM6HOC-6M0KGX-307575
>
> SM7IUN-1M0KGX-307575
>
> SV1IW-9M0KGX-307575
>
> VE3ZIN-2M0KGX-307575
>
> IK8HJC-6M0KGX-307575
>
> SM6HOC-6M0KGX-307575
>
> SM7IUN-1M0KGX-307575
>
> SV1IW-9M0KGX-307575
>
> VE3ZIN-2M0KGX-307575
>
> These9 pairs never establish a connection between spiders, beyond the 
> telnet session.
>
> I don't know if Jon M0KGX-3, is on this list, but I'm going to put it 
> in copy so you can see what's happening.
>
> Kin EA3CV
>
>
> _______________________________________________
> Dxspider-support mailing list
> Dxspider-support at tobit.co.uk
> https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support

-- 
____________________________________________________
my dxspider clusters running on a raspberry pi:
pa4jj-2 77.174.195.163 port 7300
pa4jj-3 77.174.195.163 port 7388
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.tobit.co.uk/pipermail/dxspider-support/attachments/20250107/d6e8d441/attachment-0001.htm>