[Dxspider-support] New version of Mojo (dx command fixed)

[Keith, G6NHU]

Considering this is where this all started from with the discussion about self spotting, I noticed this.

sh/var $Spot::minselfspotqrg
$Spot::minselfspotqrg = 1240000

Shouldn’t the default be 0 now as per this: https://mailman.tobit.co.uk/pipermail/dxspider-support/2023-March/018036.html ?

73 Keith G6NHU.
On 30 Jan 2025 at 13:17 +0000, Keith, G6NHU via Dxspider-support <dxspider-support at tobit.co.uk>, wrote:
> I’m not sure it’s quite right.
>
> I sent some test self spots from within a normal telnet session.
>
> So this is G0PKT self spotting and also G6NHU sending spots for G0PKT.
>
> When I do a sh/dx g0pkt, from the telnet session, this is what I see.  The spot isn’t showing.
>
> sh/dx g0pkt
> G0PKT de G6NHU-2 30-Jan-2025 1308Z dxspider >
>    7074.0 G0PKT       21-Jan-2025 1440Z test                          <G0PKT>
>
>
> I see the same if I do the same command from a console session.
>
> However, if I do an rcmd to one of my partners, the test spots I made from both G0PKT and from G6NHU show.
>
> rcmd pi4cc sh/dx g0pkt
> RCMD 'sh/dx g0pkt' sent to PI4CC
> G6NHU de G6NHU-2 30-Jan-2025 1308Z dxspider >
> PI4CC:   7074.0 G0PKT       30-Jan-2025 1245Z test                          <G0PKT>
> PI4CC:   7074.0 G0PKT       30-Jan-2025 1238Z test                          <G0PKT>
> PI4CC:   7074.0 G0PKT       30-Jan-2025 1237Z                               <G6NHU>
> PI4CC:   7074.0 G0PKT       30-Jan-2025 1214Z                               <G6NHU>
> PI4CC:   7074.0 G0PKT       21-Jan-2025 1440Z test                          <G0PKT>
>
>
> Here’s the same command locally in the console.
>
> sh/dx g0pkt
> G6NHU de G6NHU-2 30-Jan-2025 1311Z dxspider >
>    7074.0 G0PKT       21-Jan-2025 1440Z test                                              <G0PKT>
>
>
> It’s as though the spots have been sent but not shown or stored locally.
>
> Can anyone test the same please, post some spots and then see if they are shown on the local node as well as remote ones.
>
> 73 Keith G6NHU (signing posts with my callsign now as there seem to be about three Keiths on here!).
> On 30 Jan 2025 at 11:57 +0000, Dirk Koopman via Dxspider-support <dxspider-support at tobit.co.uk>, wrote:
> > Please update in the normal way. This was an error inside the dx command
> > caused by me changing a naming convention. As always: more thought (and
> > better testing) required...
> >
> > You don't need to restart. The fix will be picked up automatically when
> > you next enter a dx command.
> >
> > Dirk G1TLH
> >
> > On 30/01/2025 11:30, Mike G3YPP via Dxspider-support wrote:
> > > How do we update the (mn) node command that Kin mentions. My node will not send spots
> > >
> > > Mike G3YPP
> > > Sent from my iPhone
> > >
> > > > On 30 Jan 2025, at 10:03, dxspider-support-request at tobit.co.uk wrote:
> > > >
> > > > Re: [Dxspider-support] New version of Mojo
> > >
> > > _______________________________________________
> > > Dxspider-support mailing list
> > > Dxspider-support at tobit.co.uk
> > > https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
> >
> >
> > _______________________________________________
> > Dxspider-support mailing list
> > Dxspider-support at tobit.co.uk
> > https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
> _______________________________________________
> Dxspider-support mailing list
> Dxspider-support at tobit.co.uk
> https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.tobit.co.uk/pipermail/dxspider-support/attachments/20250130/455280d8/attachment.htm>