[Dxspider-support] New version of Mojo (dx command fixed)
Keith, G6NHU
g6nhu at me.com
Thu Jan 30 17:07:15 GMT 2025
To test this further, I’ve just logged onto one of my partner nodes (MX0NCA-2) as G0PKT. This node is running build 559.
The spots I’ve sent today from my node of G0PKT don’t show on his node.
Now I've submitted a spot on his node
'dx 7074 g6nhu test'
Then tried to look for it
’sh/dx g6nhu'
sh/dx: 'g6nhu' not found
When I do the same check on my node, the spot isn’t there.
When I look on PI4CC who is running build 547, the spot is there.
Checking another node running build 559 (R5ACQ-1), the spot is missing as well.
These aren’t self spots, this is just normal spotting. I’m convinced something isn’t right.
73 Keith G6NHU
On 30 Jan 2025 at 14:58 +0000, Keith, G6NHU via Dxspider-support <dxspider-support at tobit.co.uk>, wrote:
> I already have that variable set, I’ve had it configured that way since March 2023!
>
> If you notice, some of those spots aren’t self spots. Some were (G0PKT spotting itself) but others that don’t appear locally were G6NHU spotting G0PKT.
>
> There are no instances of ‘swore’ in the debug log and no instances of ’trying to self spot’ either.
>
> 73 Keith G6NHU
>
> On 30 Jan 2025 at 14:25 +0000, Dirk Koopman via Dxspider-support <dxspider-support at tobit.co.uk>, wrote:
> > Which means that you are probably getting a message like this in the debug:
> >
> > (DXCommand) G1TLH-2 swore: 7050 g1tlh (with words:G1TLH)
> > (*) spotter G1TLH/G1TLH
> > (DXCommand) G1TLH/G1TLH trying to self spot below 1240000KHz (7050 g1tlh) from 82.68.205.1, not passed on to cluster
> >
> > I treat self spotting as "swearing" so it dumps you off after three (configurable) attempts.
> >
> > My memory is not what it was, but I am still detecting a silent majority of sysops not liking self-spotting.
> >
> > As it's getting near to contest time, I am holding off any more updates that alter the main code so you will have to set $Spot::minselfspotqrg = 0 if that's what you want to allow on your node. This only affects locally connected users, not any incoming spots.
> >
> > Dirk G1TLH
> >
> > On 30/01/2025 13:33, Keith, G6NHU via Dxspider-support wrote:
> > > Considering this is where this all started from with the discussion about self spotting, I noticed this.
> > >
> > > sh/var $Spot::minselfspotqrg
> > > $Spot::minselfspotqrg = 1240000
> > >
> > > Shouldn’t the default be 0 now as per this: https://mailman.tobit.co.uk/pipermail/dxspider-support/2023-March/018036.html ?
> > >
> > > 73 Keith G6NHU.
> > > On 30 Jan 2025 at 13:17 +0000, Keith, G6NHU via Dxspider-support <dxspider-support at tobit.co.uk>, wrote:
> > > > I’m not sure it’s quite right.
> > > >
> > > > I sent some test self spots from within a normal telnet session.
> > > >
> > > > So this is G0PKT self spotting and also G6NHU sending spots for G0PKT.
> > > >
> > > > When I do a sh/dx g0pkt, from the telnet session, this is what I see. The spot isn’t showing.
> > > >
> > > > sh/dx g0pkt
> > > > G0PKT de G6NHU-2 30-Jan-2025 1308Z dxspider >
> > > > 7074.0 G0PKT 21-Jan-2025 1440Z test <G0PKT>
> > > >
> > > >
> > > > I see the same if I do the same command from a console session.
> > > >
> > > > However, if I do an rcmd to one of my partners, the test spots I made from both G0PKT and from G6NHU show.
> > > >
> > > > rcmd pi4cc sh/dx g0pkt
> > > > RCMD 'sh/dx g0pkt' sent to PI4CC
> > > > G6NHU de G6NHU-2 30-Jan-2025 1308Z dxspider >
> > > > PI4CC: 7074.0 G0PKT 30-Jan-2025 1245Z test <G0PKT>
> > > > PI4CC: 7074.0 G0PKT 30-Jan-2025 1238Z test <G0PKT>
> > > > PI4CC: 7074.0 G0PKT 30-Jan-2025 1237Z <G6NHU>
> > > > PI4CC: 7074.0 G0PKT 30-Jan-2025 1214Z <G6NHU>
> > > > PI4CC: 7074.0 G0PKT 21-Jan-2025 1440Z test <G0PKT>
> > > >
> > > >
> > > > Here’s the same command locally in the console.
> > > >
> > > > sh/dx g0pkt
> > > > G6NHU de G6NHU-2 30-Jan-2025 1311Z dxspider >
> > > > 7074.0 G0PKT 21-Jan-2025 1440Z test <G0PKT>
> > > >
> > > >
> > > > It’s as though the spots have been sent but not shown or stored locally.
> > > >
> > > > Can anyone test the same please, post some spots and then see if they are shown on the local node as well as remote ones.
> > > >
> > > > 73 Keith G6NHU (signing posts with my callsign now as there seem to be about three Keiths on here!).
> > > > On 30 Jan 2025 at 11:57 +0000, Dirk Koopman via Dxspider-support <dxspider-support at tobit.co.uk>, wrote:
> > > > > Please update in the normal way. This was an error inside the dx command
> > > > > caused by me changing a naming convention. As always: more thought (and
> > > > > better testing) required...
> > > > >
> > > > > You don't need to restart. The fix will be picked up automatically when
> > > > > you next enter a dx command.
> > > > >
> > > > > Dirk G1TLH
> > > > >
> > > > > On 30/01/2025 11:30, Mike G3YPP via Dxspider-support wrote:
> > > > > > How do we update the (mn) node command that Kin mentions. My node will not send spots
> > > > > >
> > > > > > Mike G3YPP
> > > > > > Sent from my iPhone
> > > > > >
> > > > > > > On 30 Jan 2025, at 10:03, dxspider-support-request at tobit.co.uk wrote:
> > > > > > >
> > > > > > > Re: [Dxspider-support] New version of Mojo
> > > > > >
> > > > > > _______________________________________________
> > > > > > Dxspider-support mailing list
> > > > > > Dxspider-support at tobit.co.uk
> > > > > > https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
> > > > >
> > > > >
> > > > > _______________________________________________
> > > > > Dxspider-support mailing list
> > > > > Dxspider-support at tobit.co.uk
> > > > > https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
> > > > _______________________________________________
> > > > Dxspider-support mailing list
> > > > Dxspider-support at tobit.co.uk
> > > > https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
> > >
> > > _______________________________________________
> > > Dxspider-support mailing list
> > > Dxspider-support at tobit.co.uk
> > > https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
> >
> > _______________________________________________
> > Dxspider-support mailing list
> > Dxspider-support at tobit.co.uk
> > https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
> _______________________________________________
> Dxspider-support mailing list
> Dxspider-support at tobit.co.uk
> https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.tobit.co.uk/pipermail/dxspider-support/attachments/20250130/0d2abe5a/attachment-0001.htm>
More information about the Dxspider-support
mailing list