[Dxspider-support] dx command actions + announce problems + links + who commands

[Jan]

With the newest build (562) I have to start my spider cluster on my 
raspberry Pi zero W by removing the power and apply the power again.

73
Jan
PA4JJ

Op 31-1-2025 om 15:16 schreef Dirk Koopman via Dxspider-support:
> Normal service is a bit tardy as I had a late night rescuing my other 
> half from a broken down car and did not get to bed until 3am.
>
> I have looked a number of versions from 536 to 561. And I remain confused.
>
> Firstly 536 stores the spot and also sends it back to a telnet console:
>
> dx 3505 g1brn test 4
> DX de G1TLH:      3505.0  G1BRN        test 4                         
> 1248Z
>
> On 561 the same is true
>
> dx 7013 g1brn test 5
> DX de G1TLH:      7013.0  G1BRN        test 5                         
> 1252Z
> G1TLH de GB7TLH 31-Jan-2025 1252Z dxspider >
>
> These spots have also been sent out to other nodes and should be 
> searchable with a sh/dx 2 g1brn.
>
> The line that sent the spot back to the user in user format had been 
> removed and has now been put back again, but will be moved slightly in 
> the next release (soon today). But it clearly was a bodge that was not 
> necessary in (waves hand randomly) earlier versions. This will be 
> fixed after this weekend.
>
> As for announcements - as well a few other things - this was a 
> consequence of me not thinking through (mainly because it seemed too 
> difficult to test) the defences I added  to prevent nodes that had not 
> fully initialised (e.g. the ungodly attempting fraud  but also CC 
> Cluster instances [nominally godly]) passing traffic. This is now fixed.
>
> I cannot reproduce errors viz: CCCluster connection on the 'links' 
> command:
>
> link
>                                                   Ave  Obs Ping  
> Next      Filters
>   Callsign Type Started                 Uptime    RTT Count Int.  Ping 
> Iso? In  Out PC92? Address
>     GB7DJK DXSP 31-Jan-2025 1347Z        6m 1s   0.03   2 300    
> 92               Y    163.172.11.79
>    VE7CC-1 CCCL 31-Jan-2025 1353Z           3s 999.00   2 300   
> 296               Y    207.216.236.158
>
> I have added an extra field to the 'who' command to indicate the 
> 'state' of that connection.
>
> who
>   Callsign Type      State    Started           Name     Ave RTT Link
>    G1TLH-2 USER LOCL prompt   31-Jan-2025 1346Z Dirk             127.0.0.1
>     GB7DJK NODE DXSP normal   31-Jan-2025 1347Z Dirk 0.03 163.172.11.79
>     GB7TLH NODE DXSP indiffer 31-Jan-2025 1346Z Dirk
>    VE7CC-1 NODE CCCL normal   31-Jan-2025 1353Z Node 0.16 207.216.236.158
>
> This version is now available from git.
>
> You will need to do a restart.
>
> 73 Dirk G1TLH
>
>
> _______________________________________________
> Dxspider-support mailing list
> Dxspider-support at tobit.co.uk
> https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support

-- 
____________________________________________________
my dxspider clusters running on a raspberry pi:
pa4jj-2 77.174.195.163 port 7300
pa4jj-3 77.174.195.163 port 7388
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.tobit.co.uk/pipermail/dxspider-support/attachments/20250131/8fee26e1/attachment-0001.htm>