[Dxspider-support] Spots rejected if connected from local network

[IZ2LSC]

Hi Chris,
please do not consider izl2sc-55 that is a test note and I am not using it
for the purpose of the issue I described here.
Can you kindly do this test:
Telnet to WI3W-2 using his private address from another PC, It is important
that you telnet from another PC using the private address.
and send a test spot
Look what is the ipaddress in the PC61 that  WI3W-2 send out to the rest of
the network

This is how mine is received from another node
23Mar2025 at 13:35:43 (pc11) INPUT IZ2LSC-99:
PC61^14000.0^IZ2LSC/P^23-Mar-2025^1335Z^test do not
consider^IZ2LSC-7^IZ2LSC-99^*192.168.1.111*^H29^~ via: IZ2LSC-99 recurse: 0

and with the new release this spot will be discarded.

Andrea

-->


On Sun, Mar 23, 2025 at 1:56 PM Christopher Schlegel <sutehk.cs at gmail.com>
wrote:

> Andrea,
>
> Your 55 node hasn't picked up the change in IP address for some reason. I
> had a similar problem on my main note until I restarted it after setting
> the variable. Your 99 node on the other hand has updated.
>
> 23Mar2025 at 11:35:48 (chan) <- I WI3W-2 PC92^IZ2LSC-55^41748^A^^1IZ2LSC-1:
> *192.168.4.216*^H95^
>
> 23Mar2025 at 11:40:12 (chan) <- I WI3W-2 PC92^IZ2LSC-99^42012^A^^1IZ2LSC-1:
> *82.84.98.150*^H95^
>
> It should look something like this...
>
> 23Mar2025 at 12:32:03 (chan) <- I WI3W-2
> PC92^WI3W-2^45123^A^^1WI3W:24.55.156.90^H99^
>
> This was received on test node WI3W-3 running build 600. My local IP is
> 192.168.3.19. Test spot submitted from WI3W-2...
>
> 23Mar2025 at 12:45:23 (chan) <- I WI3W-2
> PC61^14000.0^T3ST^23-Mar-2025^1245Z^test^WI3W^WI3W-2^24.55.156.90^H30^~
> I would run sh/var @main::localhost_names and sh/var
> $main::localhost_alias_ipv4 to verify that they are set to what you need.
> Make sure they are also defined in the startup script. If they are set,
> restart the node when you can and see if that picks up the changes.
>
> Chris, WI3W
>
> On Sun, Mar 23, 2025, 07:30 IZ2LSC via Dxspider-support <
> dxspider-support at tobit.co.uk> wrote:
>
>> Hi Dirk,
>> could you kindly help with this case:
>>
>> I run my dxspider node on my local LAN (so with a private ip address).
>> I connect to my node with my logging software that runs on a PC that is
>> on the local LAN (with private ip address).
>>
>> Every spot I send from this PC is rejected by the dxspider running test
>> branch.
>> Actually it is accepted by my local node, but then, when the PC61 message
>> is sent out to another node, it is rejected because the PC61 message
>> contains the private ip address of my PC.
>>
>> I've already configured the following
>>
>> set/var @main::localhost_names qw(127.0.0.1 ::1 192.168.4.39)
>> set/var $main::localhost_alias_ipv4 '<mypublicip>'
>>
>> 192.168.4.39 is the node address on my lan.
>>
>> 73s
>>
>> Andrea
>>
>>
>> -->
>> _______________________________________________
>> Dxspider-support mailing list
>> Dxspider-support at tobit.co.uk
>> https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.tobit.co.uk/pipermail/dxspider-support/attachments/20250323/975bc80f/attachment.htm>