<html>
  <head>
    <meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
  </head>
  <body>
    <div class="moz-cite-prefix">Historically, there is only one filter
      slot for each type of thing (spot, announce etc). When a user
      creates or alters a filter themselves, it is immediately active.
      Unfortunately, it was considered "too difficult" to trawl <u>reliably</u> 
      through node channels making sure that correct filter loads were
      set globally for alll nodes correctly with the self-defined
      filters taking precedence over the node_defaults. The argument
      being that the need for it was so rare as it wasn't a problem. <br>
      <br>
      But all that is changing. There will now be two slots per thing,
      one for the default and one for the user. The default will
      probably take precedence over the user [still thought in
      progress].<br>
      <br>
      Dirk<br>
      <br>
      <br>
      On 28/03/2020 19:07, Martin Davies G0HDB via Dxspider-support
      wrote:<br>
    </div>
    <blockquote type="cite"
      cite="mid:5E7FA086.12148.637A5A1@marting0hdb.gmail.com">
      <pre class="moz-quote-pre" wrap="">On 28 Mar 2020 at 12:18, Dirk Koopman via Dxspider-support wrote:

</pre>
      <blockquote type="cite">
        <pre class="moz-quote-pre" wrap="">Joaquin

Please do as I asked yesterday and enter these two commands:Dirk

rej/spot node_default input 2 info db info wpm info cq
rej/spot node_default 2 info db info wpm info cq

That will stop most of this, but to make it work you will either need to 
restart the node or (as there is a contest on) you will need to do a 
'links' command and then, over 10 minutes or so, disconnect each node 
individually. for example:
</pre>
      </blockquote>
      <pre class="moz-quote-pre" wrap="">
Hi Dirk (and all), just to let you know that I set the node_default spot rejects on GB7DXC-5 
yesterday and have now done the link disconnections from 'DXC-5 to its partner links ('BAA 
and 'DJK); the links were then automatically re-established after several minutes so hopefully 
the new reject filters are now fully operative.

Just out of interest, what's the rationale behind (or need for) doing the link disconnects over a 
period of 10mins or so, as you've mentioned above?  I did the disconnects of 'DXC-5 from 
'BAA and 'DJK within a short space of time (probably <1min) - should I have waited longer 
between the disconnects?

Thanks for all your guidance on how to cure the plague that is F8DGY - you can't offer a cure 
for other viruses and plagues, can you???  :-))

73,
</pre>
    </blockquote>
    <br>
  </body>
</html>