<div dir='auto'><div><span style="color: rgb(77, 81, 86); font-family: roboto, "helvetica neue", arial, sans-serif; font-size: small; background-color: rgb(255, 255, 255);">Joseph, Have you opened the ports you want to use in the firewall of your machine? For example, the 7300</span></div><div dir="auto"><font color="#4d5156" face="roboto, helvetica neue, arial, sans-serif" size="2"><br></font></div><div dir="auto"><font color="#4d5156" face="roboto, helvetica neue, arial, sans-serif" size="2">Kin</font></div><div dir="auto"><font color="#4d5156" face="roboto, helvetica neue, arial, sans-serif" size="2">EA3CV<br></font><div class="gmail_extra" dir="auto"><br><div class="gmail_quote">El 22 may. 2022 20:16, JOSEPH REED via Dxspider-support <dxspider-support@tobit.co.uk> escribió:<br type="attribution"><blockquote class="quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><p dir="ltr">After all the recent discussion I have decided to perform a B2C migration (Basement to Cloud) using Digital Ocean as the hosting platform. The cluster comes up clean but when I attempt to connect to my “production” cluster the connection fails. Connecting from N9JR-2 to N9JR-14 works fine. Connecting from N9JR-14 to N9JR-2 times out.</p>
<p dir="ltr">For reference my Digital Ocean droplet network configuration is:</p>
<p dir="ltr">eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500<br>
inet 104.131.114.21 netmask 255.255.192.0 broadcast 104.131.127.255<br>
inet6 fe80::18fb:6cff:fe9b:15a3 prefixlen 64 scopeid 0x20<link><br>
ether 1a:fb:6c:9b:15:a3 txqueuelen 1000 (Ethernet)<br>
RX packets 4225 bytes 362225 (353.7 KiB)<br>
RX errors 0 dropped 0 overruns 0 frame 0<br>
TX packets 3929 bytes 503406 (491.6 KiB)<br>
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0</p>
<p dir="ltr">eth0:1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500<br>
inet 10.17.0.5 netmask 255.255.0.0 broadcast 10.17.255.255<br>
ether 1a:fb:6c:9b:15:a3 txqueuelen 1000 (Ethernet)</p>
<p dir="ltr">eth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500<br>
inet 10.108.0.2 netmask 255.255.240.0 broadcast 10.108.15.255<br>
inet6 fe80::c80d:9ff:fec2:c4d4 prefixlen 64 scopeid 0x20<link><br>
ether ca:0d:09:c2:c4:d4 txqueuelen 1000 (Ethernet)<br>
RX packets 0 bytes 0 (0.0 B)<br>
RX errors 0 dropped 0 overruns 0 frame 0<br>
TX packets 14 bytes 1076 (1.0 KiB)<br>
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0</p>
<p dir="ltr">lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536<br>
inet 127.0.0.1 netmask 255.0.0.0<br>
inet6 ::1 prefixlen 128 scopeid 0x10<host><br>
loop txqueuelen 1000 (Local Loopback)<br>
RX packets 159 bytes 15760 (15.3 KiB)<br>
RX errors 0 dropped 0 overruns 0 frame 0<br>
TX packets 159 bytes 15760 (15.3 KiB)<br>
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0</p>
<p dir="ltr">My /spider/local/DXVars.pm file, with obvious edits is identical to that of N9JR-2. I attempted to set $clusteraddress = “104.131.114.21”; but that ended badly. Does anyone have any insight, or perhaps any Digital Ocean user and point me in the right direction.</p>
<p dir="ltr">Thanks,<br>
Joe N9JR <br>
_______________________________________________<br>
Dxspider-support mailing list<br>
Dxspider-support@tobit.co.uk<br>
https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support<br>
</p>
</blockquote></div><br></div></div></div>