<div dir="auto">I loaded a "test" DXSpider node (K4ZR-5) onto a fresh Ubuntu Server 22.04 computer using the updated wiki instructions. I'm not able to be seen from outside the home network (<a href="http://canyouseeme.org">canyouseeme.org</a>). The only networking setup for the Ubuntu Server was:<div dir="auto"><br></div><div dir="auto">ufw allow 8800/tcp</div><div dir="auto">ufw enable</div><div dir="auto"><br></div><div dir="auto">What else needs to be done for the firewall or NAT?</div><div dir="auto"><br></div><div dir="auto">Let me add, my main node (K4ZR) is running no problem on a different Ubuntu Desktop 22.04.1 computer. Both nodes are connected to the outside world via an AT&T fiber router. I've been using port forwarding with K4ZR for many years without any problems.<div dir="auto"><br></div><div dir="auto">K4ZR       7300/TCP    192.168.5.200</div><div dir="auto">K4ZR-5   8800/TCP    192.168.5.100</div><div dir="auto"><br></div><div dir="auto">Both clusters can connect and talk to each other within the home network. I added the port forward entry on the router for K4ZR-5 and verified port 8800 was open using the Ubuntu Desktop computer and changing Listeners.pm to 8800 temporarily.</div><div dir="auto"><br></div><div dir="auto">If someone could point me in the right direction please. I've spent the last few days on the internet reading and trying to figure it out on my own. Has anyone run into this before? Thanks in advance.</div><div dir="auto"><br></div><div dir="auto">73, Steve - AA4U </div><div dir="auto"><br></div><div dir="auto"><br></div></div></div>