[Dxspider-support] Broadcast

[Erminio Pandocchi]

        I think you miss something. You have DX Spider using AGW interface to your RF ports, yes? 

          Yes you are right

        So just add AGW Cluster, it will 'see' the same RF ports.

        Yes but I have to choose one of the ports(or the TCP/IP) to connect the cluster node

        Ciao
        Erminio



         Set it to rebroadcast UI DX spots on the RF port(s) of your choice. In Properties>Radio set up the callsign and the Cluster callsign and in Options check the box 'Announce DX'. With AGW you can add any number of AGW compatible programs, just give each a separate callsign or SSID. So if your cluster has callsign IR4AA then setup AGWCluster with IR4AA-1 and the DX spot UI frames will be sent in format: IR4AA-1>DX <UI C>  

        Yes I know

        I hope that helps.

        Eric.


        -------Original Message-------

        From: The DXSpider Support list
        Date: Thursday, December 04, 2003 17:49:59
        To: The DXSpider Support list
        Subject: Re: [Dxspider-support] Broadcast

        Thanks for the answer
        But it can't work.I need to connect via telenet on one side and broadcast spots on the other side.
        To be able to use AGWCluster I should have two radios,the first for the cluster and the second for AGWCluster(or I missed some setting?)
        Erminio
        ----- Original Message ----- 
        From: Eric Carling 
        To: dxspider-support at dxcluster.org 
        Sent: Thursday, December 04, 2003 4:17 PM
        Subject: Re: [Dxspider-support] Broadcast


              Use the AGWCluster software - it has UI frame facility to broadcast DX Spots from your Cluster. You will find it on the SV2AGW web site with instructions for setting it up. 

              Eric G0CGL.

              -------Original Message-------

              From: The DXSpider Support list
              Date: Thursday, December 04, 2003 13:53:16
              To: The DXSpider Support list
              Subject: [Dxspider-support] Broadcast

              I am looking for a way to broadcast spots
              Some stations have problems to connect my node so I would like to send spots
              around when nobody is connected to the Cluster.
              Using windows 2k and SV1AGW
              Thanks




              _______________________________________________
              Dxspider-support mailing list
              Dxspider-support at dxcluster.org
              http://www.tobit.co.uk/mailman/listinfo/dxspider-support
              . 
                     
             



------------------------------------------------------------------------


        _______________________________________________
        Dxspider-support mailing list
        Dxspider-support at dxcluster.org
        http://www.tobit.co.uk/mailman/listinfo/dxspider-support

       
               
       



------------------------------------------------------------------------------


  _______________________________________________
  Dxspider-support mailing list
  Dxspider-support at dxcluster.org
  http://www.tobit.co.uk/mailman/listinfo/dxspider-support
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tobit.co.uk/pipermail/dxspider-support/attachments/20031204/0771d96d/attachment.html