[Dxspider-support] Broadcast

[Eric Carling]

You can do that or better still define a 'loopback port'

73. 
 
-------Original Message-------
 
From: The DXSpider Support list
Date: Thursday, December 04, 2003 18:35:14
To: The DXSpider Support list
Subject: Re: [Dxspider-support] Broadcast
 
 
I think you miss something. You have DX Spider using AGW interface to your
RF ports, yes? 
 
  Yes you are right
 
So just add AGW Cluster, it will 'see' the same RF ports.
 
Yes but I have to choose one of the ports(or the TCP/IP) to connect the
cluster node
 
Ciao
Erminio
 
 
 
 Set it to rebroadcast UI DX spots on the RF port(s) of your choice. In
Properties>Radio set up the callsign and the Cluster callsign and in Options
check the box 'Announce DX'. With AGW you can add any number of AGW
compatible programs, just give each a separate callsign or SSID. So if your
cluster has callsign IR4AA then setup AGWCluster with IR4AA-1 and the DX
spot UI frames will be sent in format: IR4AA-1>DX <UI C>  
 
Yes I know
 
I hope that helps.
 
Eric.
 
 
-------Original Message-------
 
From: The DXSpider Support list
Date: Thursday, December 04, 2003 17:49:59
To: The DXSpider Support list
Subject: Re: [Dxspider-support] Broadcast
 
Thanks for the answer
But it can't work.I need to connect via telenet on one side and broadcast
spots on the other side.
To be able to use AGWCluster I should have two radios,the first for the
cluster and the second for AGWCluster(or I missed some setting?)
Erminio
----- Original Message ----- 
From: Eric Carling 
To: dxspider-support at dxcluster.org 
Sent: Thursday, December 04, 2003 4:17 PM
Subject: Re: [Dxspider-support] Broadcast


Use the AGWCluster software - it has UI frame facility to broadcast DX Spots
from your Cluster. You will find it on the SV2AGW web site with instructions
for setting it up. 
 
Eric G0CGL.
 
-------Original Message-------
 
From: The DXSpider Support list
Date: Thursday, December 04, 2003 13:53:16
To: The DXSpider Support list
Subject: [Dxspider-support] Broadcast
 
I am looking for a way to broadcast spots
Some stations have problems to connect my node so I would like to send spots
around when nobody is connected to the Cluster.
Using windows 2k and SV1AGW
Thanks
 
 
 
 
_______________________________________________
Dxspider-support mailing list
Dxspider-support at dxcluster.org
http://www.tobit.co.uk/mailman/listinfo/dxspider-support
.






_______________________________________________
Dxspider-support mailing list
Dxspider-support at dxcluster.org
http://www.tobit.co.uk/mailman/listinfo/dxspider-support

 






_______________________________________________
Dxspider-support mailing list
Dxspider-support at dxcluster.org
http://www.tobit.co.uk/mailman/listinfo/dxspider-support

 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tobit.co.uk/pipermail/dxspider-support/attachments/20031204/c7923284/attachment.html