[Dxspider-support] After Reconfigure

[Dirk Koopman]

Have a look at your /etc/hosts file and check that you have a line in it
which says something like:-

127.0.0.1 localhost.localdomain localhost

On Mon, 2003-12-29 at 12:07, Colin Harris wrote:
> Hi all,
>               For those interested GB7PDX is closing on 31st Dec. due to
> loss of local link packet node.
> 
> Hopefully this should re-emerge as GB7NHT being run by a different sysop at
> a different location but with all the changes and reconfiguration of the
> ax25 / netrom plus the cluster info I have run into a slight glitch with
> Spider. I've seen this mentioned before ( or similar ) but cannot remember
> the solution.
> 
> Error is :-
> 
> IO : : Socket : : INET; bad Hostname ' localhost : 27754
> MSG : : new_server ('int msg', ' localhost ', 27754, 'CODE (0x896325c)')
> called at
> ./cluster.pl line 432
> 
> Could not create socket : resource temporarily unavailable
> 
> Cluster doesn't run of course. As this machine was the old cluster machine
> of GB7ORH
> I decided it was easiest to start afresh so a complete install was done but
> the currently installed CPAN modules were left as is on the assumption they
> didn't need changing.
> 
> Have I missed something ?
> 
> Spider version installed is 1.51-57.245 and the usual Spider install routine
> was strictly adhered to. The cluster port and node ports are actually 7400
> and 7300 respectively ( 7300 is working fine .7400 untested until I get
> Spider fired up successfully.
> 
> - Regards Colin
> 
> 
> _______________________________________________
> Dxspider-support mailing list
> Dxspider-support at dxcluster.org
> http://www.tobit.co.uk/mailman/listinfo/dxspider-support
>