[Dxspider-support] AX25 Connects
Klaus Heintzenberg
dj6rx at t-online.de
Sat Nov 1 08:55:27 GMT 2003
DXS 1.5 57.253 (SuSE 9.0)
Still learning how to install and run DXS.
It is working now and one can have telnet connects with db0spc-7. So far so
great.
Last night I hooked it up to the RMNC (Packet Switch) and tried first AX25
connects.
One get a connect right away and it sends all the greetings, motd, etc until
to the first prompt and
then you are kicked out and disconnected.
I tried all kinds of different settings in axports, ax25d.conf and rc.ax25.
Either I do not get any reply
or just a connect which lasts about 423ms. After the first prompt I'm
disconnected. DXS does write
these connects and disconnects into the logbook.
Here are the three files which may have a problem:
axports:
---------
# portname callsign baudrate paclen window decription
ax0 db0spc 38400 256 7 SPC38400
ax25.conf
------------
#
[DB0SPC-7 via ax0]
NOCALL * * * * * * L
DB0ADX * * * * * * - sysop /spider/src/client client DB0ADX ax25
DB0ERF-6 * * * * * * - sysop /spider/src/client client DB0ERF-6 ax25
DB0ERF-7 * * * * * * - sysop /spider/src/client client DB0ERF-7 ax25
HB9IAC-8 * * * * * * - sysop /spider/src/client client HB9IAC-8 ax25
ON0DXK-5 * * * * * * - sysop /spider/src/client client ON0DXK-5 ax25
default * * * * * * - sysop /spider/src/client client %s ax25
#
rc.ax25
--------
#!/bin/sh
#
#
# kissattach -m 256 /dev/ttyS0 ax0 44.39.0.12 &
kissattach /dev/ttyS0 ax0 44.39.0.12
#
# sleep wie bei HB9IAC-8
sleep 1
#
/usr/sbin/kissparms -p ax0 -f y -t 10 -s 10 -r 255
#
#
ax25d
#
####################################################
It sends 2 frames and then a DISC+
<T5 DB0SPC>DB0SPC-7 SABM+>
<R5 DB0SPC-7>DB0SPC UA->
<R5 DB0SPC-7>DB0SPC DISC+>
<T5 DB0SPC>DB0SPC-7 UA->
<T5 DJ6RX>DB0SPC-7 v DB0SPC* SABM+>
<R5 DB0SPC-7>DJ6RX v DB0SPC UA->
<R5 DB0SPC-7>DJ6RX v DB0SPC I00^>: Hello Klaus, this is DB0SPC-7 in Mainz
running DXSpider V1.51 build 57.253
***************************************************
* Aktuelle Infos bitte mit 'news' abrufen. *
* Messages mit /EX abschliessen, NICHT mit ctrl-Z *
*****
<T5 DJ6RX>DB0SPC-7 v DB0SPC* RR1v>
<R5 DB0SPC-7>DJ6RX v DB0SPC I01+>:
*********************************************
*
*Echoing is currently disabled, set/echo to enable
Cluster: 1 nodes, 1 local / 1 total users Max users 1 Uptime 0 00:03
DJ6RX de DB0SPC-7 31-Oct-2003 2310Z >
<T5 DJ6RX>DB0SPC-7 v DB0SPC* RR2->
<R5 DB0SPC-7>DJ6RX v DB0SPC DISC+>
<T5 DJ6RX>DB0SPC-7 v DB0SPC* UA->
----------------------------------------------------------------------------
----------------
When I monitor the Dxspider monitor screen I see e.g.
Channel DJ6RX created(2)
DJ6RX ax25
Hello Klaus..and so on
..
channel func state 0 -> prompt
greeting text , motd goes on.
DJ6RX 0
DJ6RX de DB0SPC-7 1-Nov-2003 0724z >
Channel DJ6RX destroyed(2)
That was it and a disconnect follows
What changes do I have to make and where is the problem?
Please advise.
73, Klaus (DJ6RX)
----------E-Mail: dj6rx at web.de -------Tele. 06135-950839----------
More information about the Dxspider-support
mailing list