[Dxspider-support] SH/FDX ?

[Dirk Koopman]

I have updated CVS with this command as well as a VERY important change
which should be applied ASAP. Unfortunately, whilst my developer access
to CVS is completely up to date, the normal CVS from sourceforge is
lagging several hours behind. 

This means that I cannot make an announcement (that needs to be made)
and so a problem is being perpetuated that needs to be stopped. I have
put in a bandaid on various nodes but I cannot issue the announcement
until it is in CVS (and thus CVSlatest.tgz).

Watch this space.

Dirk 

BTW Brendan, if you have aliased something or created a local show/fdx
then you will need to remember to remove these when you upgrade. I have
created a new system Alias called sh/fdx.

On Fri, 2004-01-09 at 14:04, Brendan Minish wrote:
> Basically SH/FDX does what the SH/DX command does but the output format is 
> identical to the normal spot format. this means that stupid logging 
> software can process the spots as if they were live / real time spots
> DX de DK3WG:     10107.0  EK3AA                                      1403Z JO72
> 
> instead of
> 14088.0  T77M         9-Jan-2004 1357Z  rtty/fsk                      <WX5L>
> 
> 
> AK1A clusters can do this
> 
> I have hacked together a local command to do SH/FDX and I can send you a 
> copy if you like but it would be nicer if SH/FXD became part of the normal 
> cluster command set since my bodge job won't track any changes to sh/dx
> 
> 
> At 13:50 09/01/2004, you wrote:
> >Hi All, I just started running the cluster here (GB7NHT) so apologise if 
> >this is an obvious question but I dont understand what this user is asking for.
> >Any help would be apreciated.
> >
> >Msg copied below:
> >
> >Also if you should see how to include SH/FDX into the cluster this would 
> >be much appreciated.  SH/DX/10 for example brings back a string of the 
> >last ten stations but SH/FDX/10 brings the station in one at a time and 
> >the logging program can then check if you have worked them etc.
> >This facility is on many US Clusters but was not on WDX or PDX.
> >
> >Regards, Frank, g0gsr (GB7NHT)
> >
> >
> >_______________________________________________
> >Dxspider-support mailing list
> >Dxspider-support at dxcluster.org
> >http://www.tobit.co.uk/mailman/listinfo/dxspider-support
> >
> 
> 
> _______________________________________________
> Dxspider-support mailing list
> Dxspider-support at dxcluster.org
> http://www.tobit.co.uk/mailman/listinfo/dxspider-support
>