[Dxspider-support] Is there a way to

[Keith Hornyak]

Accomplished all below but no activity on the Terminal screen - do have the message in the Beacon.txt going out.  But nothing coming in to DX Spider from the Telnet port is making it over to AGW Cluster - says Cluster Idle - even though spots are coming in via telnet...  I have something not properly configured - the TNC is on port1 - as long as a user is connected to the cluster there are RF spots going out.  Without an RF user, there are not spots being broadcast.
  ----- Original Message ----- 
  From: Eric Carling 
  To: The DXSpider Support list 
  Sent: Saturday, April 09, 2005 8:06 AM
  Subject: Re: [Dxspider-support] Is there a way to


        Launch AGWCluster and go to File>Properties.

        On the Radio tab set the AGW port that connects AGWCluster to your DXSpider - most likely the loopback port which you will have defined in AGWPE (but depending on your configuration, the local RF port could be used).

        Set your callsign for AGWCluster (your call with or without SSID depending on whether the call is already in use for another AGW client or preferably the Cluster call with SSID so that unconnected users can more readily identify the DX spot beacon) 

        Set the Cluster call

        Set the country prefix(es).

        On the Options tab check Announce DX and uncheck Spell DX.

        You can verify the operation by using the Terminal screen.


        -------Original Message-------

        From: Keith Hornyak
        Date: 04/09/05 11:47:46
        To: The DXSpider Support list
        Subject: Re: [Dxspider-support] Is there a way to

        That's correct - good description - this way people don't have to be 'connected' to the system to receive spots...
        ----- Original Message ----- 
        From: KC2CWT 
        To: The DXSpider Support list 
        Sent: Saturday, April 09, 2005 7:37 AM
        Subject: RE: [Dxspider-support] Is there a way to 


        What are you trying to do , Send spot out over the Rf port like a bacon ? 





        -----Original Message-----
        From: dxspider-support-bounces at dxcluster.org [mailto:dxspider-support-bounces at dxcluster.org]On Behalf Of Keith Hornyak
        Sent: Friday, April 08, 2005 11:20 PM
        To: The DXSpider Support list
        Subject: [Dxspider-support] Is there a way to 



        Am running DX Spider on Win9x system with AGWPE.  I obtain DX Spots via Internet; have a local RF Port.  Want to send spots on that RF Port  even if no users connected on RF.  Have downloaded AGWCluster but how do I configure it to send DX spots even if no RF users connected?  Is this the correct program?  I have AGWCluster interfaced - all it does is BEACON (via the Beacon.txt).  Any ideas?



------------------------------------------------------------------------


        _______________________________________________
        Dxspider-support mailing list
        Dxspider-support at dxcluster.org
        http://www.tobit.co.uk/mailman/listinfo/dxspider-support

       
               
       



------------------------------------------------------------------------------


  _______________________________________________
  Dxspider-support mailing list
  Dxspider-support at dxcluster.org
  http://www.tobit.co.uk/mailman/listinfo/dxspider-support
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tobit.co.uk/pipermail/dxspider-support/attachments/20050409/a55f700d/attachment-0001.html