[Dxspider-support] Is there a way to
ww1r at bellsouth.net
ww1r at bellsouth.net
Sun Apr 10 06:05:29 BST 2005
download unidx program and it will transmit the spots over the ax25port for you. ww1r
----- Original Message -----
From: Keith Hornyak
To: Eric Carling ; The DXSpider Support list
Sent: Saturday, April 09, 2005 9:09 AM
Subject: Re: [Dxspider-support] Is there a way to
Accomplished all below but no activity on the Terminal screen - do have the message in the Beacon.txt going out. But nothing coming in to DX Spider from the Telnet port is making it over to AGW Cluster - says Cluster Idle - even though spots are coming in via telnet... I have something not properly configured - the TNC is on port1 - as long as a user is connected to the cluster there are RF spots going out. Without an RF user, there are not spots being broadcast.
----- Original Message -----
From: Eric Carling
To: The DXSpider Support list
Sent: Saturday, April 09, 2005 8:06 AM
Subject: Re: [Dxspider-support] Is there a way to
Launch AGWCluster and go to File>Properties.
On the Radio tab set the AGW port that connects AGWCluster to your DXSpider - most likely the loopback port which you will have defined in AGWPE (but depending on your configuration, the local RF port could be used).
Set your callsign for AGWCluster (your call with or without SSID depending on whether the call is already in use for another AGW client or preferably the Cluster call with SSID so that unconnected users can more readily identify the DX spot beacon)
Set the Cluster call
Set the country prefix(es).
On the Options tab check Announce DX and uncheck Spell DX.
You can verify the operation by using the Terminal screen.
-------Original Message-------
From: Keith Hornyak
Date: 04/09/05 11:47:46
To: The DXSpider Support list
Subject: Re: [Dxspider-support] Is there a way to
That's correct - good description - this way people don't have to be 'connected' to the system to receive spots...
----- Original Message -----
From: KC2CWT
To: The DXSpider Support list
Sent: Saturday, April 09, 2005 7:37 AM
Subject: RE: [Dxspider-support] Is there a way to
What are you trying to do , Send spot out over the Rf port like a bacon ?
-----Original Message-----
From: dxspider-support-bounces at dxcluster.org [mailto:dxspider-support-bounces at dxcluster.org]On Behalf Of Keith Hornyak
Sent: Friday, April 08, 2005 11:20 PM
To: The DXSpider Support list
Subject: [Dxspider-support] Is there a way to
Am running DX Spider on Win9x system with AGWPE. I obtain DX Spots via Internet; have a local RF Port. Want to send spots on that RF Port even if no users connected on RF. Have downloaded AGWCluster but how do I configure it to send DX spots even if no RF users connected? Is this the correct program? I have AGWCluster interfaced - all it does is BEACON (via the Beacon.txt). Any ideas?
----------------------------------------------------------------------
_______________________________________________
Dxspider-support mailing list
Dxspider-support at dxcluster.org
http://www.tobit.co.uk/mailman/listinfo/dxspider-support
----------------------------------------------------------------------------
_______________________________________________
Dxspider-support mailing list
Dxspider-support at dxcluster.org
http://www.tobit.co.uk/mailman/listinfo/dxspider-support
------------------------------------------------------------------------------
_______________________________________________
Dxspider-support mailing list
Dxspider-support at dxcluster.org
http://www.tobit.co.uk/mailman/listinfo/dxspider-support
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tobit.co.uk/pipermail/dxspider-support/attachments/20050410/c0e8e995/attachment.html
More information about the Dxspider-support
mailing list