[Dxspider-support] automatic starting ?

[Ian J Maude]

f8arr wrote:
> hum, effectivly the ttys3 wasn't set.
>
> Here is my last inittab :
>   
You have tty6 set as a mingetty Guillaume.  You can only set a tty once 
I believe.  You also appear to have the spider respawn line in twice?

Ian
> # getty-programs for the normal runlevels
> # <id>:<runlevels>:<action>:<process>
> # The "id" field  MUST be the same as the last
> # characters of the device (after "tty").
> 1:2345:respawn:/sbin/mingetty --noclear tty1
> 2:2345:respawn:/sbin/mingetty tty2
> 3:2345:respawn:/sbin/mingetty tty3
> 4:2345:respawn:/sbin/mingetty tty4
> 5:2345:respawn:/sbin/mingetty tty5
> 6:2345:respawn:/sbin/mingetty tty6
> #
> #S0:12345:respawn:/sbin/agetty -L 9600 ttyS0 vt102
>
> #
> #  Note: Do not use tty7 in runlevel 3, this virtual line
> #  is occupied by the programm xdm.
> #
>
> #  This is for the package xdmsc, after installing and
> #  and configuration you should remove the comment character
> #  from the following line:
> #7:3:respawn:+/etc/init.d/rx tty7
>
>
> # modem getty.
> # mo:235:respawn:/usr/sbin/mgetty -s 38400 modem
>
> # fax getty (hylafax)
> # mo:35:respawn:/usr/lib/fax/faxgetty /dev/modem
>
> # vbox (voice box) getty
> # I6:35:respawn:/usr/sbin/vboxgetty -d /dev/ttyI6
> # I7:35:respawn:/usr/sbin/vboxgetty -d /dev/ttyI7
>
> DX:235:respawn:/bin/su -c "/usr/bin/perl -w /spider/perl/cluster.pl" 
> sysop >/dev/tty6
>
> ##Start DXSpider on bootup and respawn it should it crash
> #DX:235:respawn:/bin/su -c "/usr/bin/perl -w /spider/perl/cluster.pl" 
> sysop >/dev/null
> #DX:235:respawn:/bin/su  -c "/usr/bin/perl -w /spider/perl/cluster.pl" 
> sysop > /dev/tty6
> #dx:235:respawn:/bin/su - sysop -c "/usr/bin/perl -w 
> /spider/perl/cluster.pl"
>
> DX:235:respawn:/bin/su -c "/usr/bin/perl -w /spider/perl/cluster.pl" 
> sysop >/dev/tty6
>
> # end of /etc/inittab
>
> ------------------------------------------
>
>
> When i do "telinit q"
>
> I have no problem under /var/log/messages
>
> --------------
>  init: Re-reading inittab
> ---------------
>
>
> Best regards
> Guillaume f8arr
>
>
>
>
>
> Dirk Koopman a écrit :
>   
>> f8arr wrote:
>>   
>>     
>>> hue !
>>>
>>> Thanks for help but it doesn't work better..  of course with bad word i 
>>> had no chances it works, but it was an keyboard mistake.
>>> I have made modifications to be sure..
>>>
>>> no better :-(
>>>
>>> DX:235:respawn:/bin/su -c "/usr/bin/perl -w /spider/perl/cluster.pl" 
>>> sysop >/dev/ttys3
>>>
>>>     
>>>       
>>  > /dev/tty6. ttys3 probably does not exist.
>>
>> and you to need # out
>>
>> 6:2345:respawn:/sbin/mingetty tty6
>>
>> so that you don't contend for the same tty.
>>
>> Dirk
>>
>> _______________________________________________
>> Dxspider-support mailing list
>> Dxspider-support at dxcluster.org
>> http://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
>>
>>   
>>     
>
> _______________________________________________
> Dxspider-support mailing list
> Dxspider-support at dxcluster.org
> http://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
>
>
>
>   


-- 
Ian J Maude G0VGS
SysOp GB7MBC DX Cluster
Member of RSGB, ARRL, GQRP
K2 #4044