[Dxspider-support] automatic starting ?

f8arr f8arr at f8arr.org
Mon May 7 14:33:20 CEST 2007


hue not,

my copy / past is not good.
I just have on line for spider...

sorry
Guillaume.

Ian J Maude a écrit :
> f8arr wrote:
>   
>> hum, effectivly the ttys3 wasn't set.
>>
>> Here is my last inittab :
>>   
>>     
> You have tty6 set as a mingetty Guillaume.  You can only set a tty once 
> I believe.  You also appear to have the spider respawn line in twice?
>
> Ian
>   
>> # getty-programs for the normal runlevels
>> # <id>:<runlevels>:<action>:<process>
>> # The "id" field  MUST be the same as the last
>> # characters of the device (after "tty").
>> 1:2345:respawn:/sbin/mingetty --noclear tty1
>> 2:2345:respawn:/sbin/mingetty tty2
>> 3:2345:respawn:/sbin/mingetty tty3
>> 4:2345:respawn:/sbin/mingetty tty4
>> 5:2345:respawn:/sbin/mingetty tty5
>> 6:2345:respawn:/sbin/mingetty tty6
>> #
>> #S0:12345:respawn:/sbin/agetty -L 9600 ttyS0 vt102
>>
>> #
>> #  Note: Do not use tty7 in runlevel 3, this virtual line
>> #  is occupied by the programm xdm.
>> #
>>
>> #  This is for the package xdmsc, after installing and
>> #  and configuration you should remove the comment character
>> #  from the following line:
>> #7:3:respawn:+/etc/init.d/rx tty7
>>
>>
>> # modem getty.
>> # mo:235:respawn:/usr/sbin/mgetty -s 38400 modem
>>
>> # fax getty (hylafax)
>> # mo:35:respawn:/usr/lib/fax/faxgetty /dev/modem
>>
>> # vbox (voice box) getty
>> # I6:35:respawn:/usr/sbin/vboxgetty -d /dev/ttyI6
>> # I7:35:respawn:/usr/sbin/vboxgetty -d /dev/ttyI7
>>
>> DX:235:respawn:/bin/su -c "/usr/bin/perl -w /spider/perl/cluster.pl" 
>> sysop >/dev/tty6
>>
>> ##Start DXSpider on bootup and respawn it should it crash
>> #DX:235:respawn:/bin/su -c "/usr/bin/perl -w /spider/perl/cluster.pl" 
>> sysop >/dev/null
>> #DX:235:respawn:/bin/su  -c "/usr/bin/perl -w /spider/perl/cluster.pl" 
>> sysop > /dev/tty6
>> #dx:235:respawn:/bin/su - sysop -c "/usr/bin/perl -w 
>> /spider/perl/cluster.pl"
>>
>> DX:235:respawn:/bin/su -c "/usr/bin/perl -w /spider/perl/cluster.pl" 
>> sysop >/dev/tty6
>>
>> # end of /etc/inittab
>>
>> ------------------------------------------
>>
>>
>> When i do "telinit q"
>>
>> I have no problem under /var/log/messages
>>
>> --------------
>>  init: Re-reading inittab
>> ---------------
>>
>>
>> Best regards
>> Guillaume f8arr
>>
>>
>>
>>
>>
>> Dirk Koopman a écrit :
>>   
>>     
>>> f8arr wrote:
>>>   
>>>     
>>>       
>>>> hue !
>>>>
>>>> Thanks for help but it doesn't work better..  of course with bad word i 
>>>> had no chances it works, but it was an keyboard mistake.
>>>> I have made modifications to be sure..
>>>>
>>>> no better :-(
>>>>
>>>> DX:235:respawn:/bin/su -c "/usr/bin/perl -w /spider/perl/cluster.pl" 
>>>> sysop >/dev/ttys3
>>>>
>>>>     
>>>>       
>>>>         
>>>  > /dev/tty6. ttys3 probably does not exist.
>>>
>>> and you to need # out
>>>
>>> 6:2345:respawn:/sbin/mingetty tty6
>>>
>>> so that you don't contend for the same tty.
>>>
>>> Dirk
>>>
>>> _______________________________________________
>>> Dxspider-support mailing list
>>> Dxspider-support at dxcluster.org
>>> http://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
>>>
>>>   
>>>     
>>>       
>> _______________________________________________
>> Dxspider-support mailing list
>> Dxspider-support at dxcluster.org
>> http://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
>>
>>
>>
>>   
>>     
>
>
>   



More information about the Dxspider-support mailing list