[Dxspider-support] automatic starting ?

[f8arr]

Thanks to all.. it's working but i had to reboot ??!!
I thought that telinit q should be sufficient...

well it's working thanks at all for correcting my mistakes...

best regards
f8Arr
nb: If some of you wants to make a link with us it will be a great pleasure.




Mike McCarthy, W1NR a écrit :
> You need to disable the getty for tty6 otherwise there is a conflict...
>
> Put a # in front of the line
>
> 6:2345:respawn:/sbin/mingetty tty6
>
> 73 de Mike, W1NR
>
>
> f8arr wrote:
>   
>> hum, effectivly the ttys3 wasn't set.
>>
>> Here is my last inittab :
>>
>>
>> -------------------------
>> #
>> # /etc/inittab
>> #
>> # Copyright (c) 1996-2002 SuSE Linux AG, Nuernberg, Germany.  All rights 
>> reserved.
>> #
>> # Author: Florian La Roche, 1996
>> # Please send feedback to http://www.suse.de/feedback
>> #
>> # This is the main configuration file of /sbin/init, which
>> # is executed by the kernel on startup. It describes what
>> # scripts are used for the different run-levels.
>> #
>> # All scripts for runlevel changes are in /etc/init.d/.
>> #
>> # This file may be modified by SuSEconfig unless CHECK_INITTAB
>> # in /etc/sysconfig/suseconfig is set to "no"
>> #
>>
>> # The default runlevel is defined here
>> id:3:initdefault:
>>
>> # First script to be executed, if not booting in emergency (-b) mode
>> si::bootwait:/etc/init.d/boot
>>
>> # /etc/init.d/rc takes care of runlevel handling
>> #
>> # runlevel 0  is  System halt   (Do not use this for initdefault!)
>> # runlevel 1  is  Single user mode
>> # runlevel 2  is  Local multiuser without remote network (e.g. NFS)
>> # runlevel 4  is  Not used
>> # runlevel 5  is  Full multiuser with network and xdm
>> # runlevel 6  is  System reboot (Do not use this for initdefault!)
>> #
>> l0:0:wait:/etc/init.d/rc 0
>> l1:1:wait:/etc/init.d/rc 1
>> l2:2:wait:/etc/init.d/rc 2
>> l3:3:wait:/etc/init.d/rc 3
>> l4:4:wait:/etc/init.d/rc 4
>> l5:5:wait:/etc/init.d/rc 5
>> #l6:6:wait:/etc/init.d/rc 6
>>
>> # what to do in single-user mode
>> ls:S:wait:/etc/init.d/rc S
>> ~~:S:respawn:/sbin/sulogin
>>
>> # what to do when CTRL-ALT-DEL is pressed
>> ca::ctrlaltdel:/sbin/shutdown -r -t 4 now
>>
>> # special keyboard request (Alt-UpArrow)
>> # look into the kbd-0.90 docs for this
>> kb::kbrequest:/bin/echo "Keyboard Request -- edit /etc/inittab to let 
>> this work."
>>
>> # what to do when power fails/returns
>> pf::powerwait:/etc/init.d/powerfail start
>> pn::powerfailnow:/etc/init.d/powerfail now
>> #pn::powerfail:/etc/init.d/powerfail now
>> po::powerokwait:/etc/init.d/powerfail stop
>>
>> # for ARGO UPS
>> sh:12345:powerfail:/sbin/shutdown -h now THE POWER IS FAILING
>>
>> # getty-programs for the normal runlevels
>> # <id>:<runlevels>:<action>:<process>
>> # The "id" field  MUST be the same as the last
>> # characters of the device (after "tty").
>> 1:2345:respawn:/sbin/mingetty --noclear tty1
>> 2:2345:respawn:/sbin/mingetty tty2
>> 3:2345:respawn:/sbin/mingetty tty3
>> 4:2345:respawn:/sbin/mingetty tty4
>> 5:2345:respawn:/sbin/mingetty tty5
>> 6:2345:respawn:/sbin/mingetty tty6
>> #
>> #S0:12345:respawn:/sbin/agetty -L 9600 ttyS0 vt102
>>
>> #
>> #  Note: Do not use tty7 in runlevel 3, this virtual line
>> #  is occupied by the programm xdm.
>> #
>>
>> #  This is for the package xdmsc, after installing and
>> #  and configuration you should remove the comment character
>> #  from the following line:
>> #7:3:respawn:+/etc/init.d/rx tty7
>>
>>
>> # modem getty.
>> # mo:235:respawn:/usr/sbin/mgetty -s 38400 modem
>>
>> # fax getty (hylafax)
>> # mo:35:respawn:/usr/lib/fax/faxgetty /dev/modem
>>
>> # vbox (voice box) getty
>> # I6:35:respawn:/usr/sbin/vboxgetty -d /dev/ttyI6
>> # I7:35:respawn:/usr/sbin/vboxgetty -d /dev/ttyI7
>>
>> DX:235:respawn:/bin/su -c "/usr/bin/perl -w /spider/perl/cluster.pl" 
>> sysop >/dev/tty6
>>
>> ##Start DXSpider on bootup and respawn it should it crash
>> #DX:235:respawn:/bin/su -c "/usr/bin/perl -w /spider/perl/cluster.pl" 
>> sysop >/dev/null
>> #DX:235:respawn:/bin/su  -c "/usr/bin/perl -w /spider/perl/cluster.pl" 
>> sysop > /dev/tty6
>> #dx:235:respawn:/bin/su - sysop -c "/usr/bin/perl -w 
>> /spider/perl/cluster.pl"
>>
>> DX:235:respawn:/bin/su -c "/usr/bin/perl -w /spider/perl/cluster.pl" 
>> sysop >/dev/tty6
>>
>> # end of /etc/inittab
>>
>> ------------------------------------------
>>
>>
>> When i do "telinit q"
>>
>> I have no problem under /var/log/messages
>>
>> --------------
>>  init: Re-reading inittab
>> ---------------
>>
>>
>> Best regards
>> Guillaume f8arr
>>
>>
>>
>>
>>
>> Dirk Koopman a écrit :
>>     
>>> f8arr wrote:
>>>   
>>>       
>>>> hue !
>>>>
>>>> Thanks for help but it doesn't work better..  of course with bad word i 
>>>> had no chances it works, but it was an keyboard mistake.
>>>> I have made modifications to be sure..
>>>>
>>>> no better :-(
>>>>
>>>> DX:235:respawn:/bin/su -c "/usr/bin/perl -w /spider/perl/cluster.pl" 
>>>> sysop >/dev/ttys3
>>>>
>>>>     
>>>>         
>>>  > /dev/tty6. ttys3 probably does not exist.
>>>
>>> and you to need # out
>>>
>>> 6:2345:respawn:/sbin/mingetty tty6
>>>
>>> so that you don't contend for the same tty.
>>>
>>> Dirk
>>>
>>> _______________________________________________
>>> Dxspider-support mailing list
>>> Dxspider-support at dxcluster.org
>>> http://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
>>>
>>>   
>>>       
>> _______________________________________________
>> Dxspider-support mailing list
>> Dxspider-support at dxcluster.org
>> http://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
>>
>>
>>     
>
>
> _______________________________________________
> Dxspider-support mailing list
> Dxspider-support at dxcluster.org
> http://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
>
>