[Dxspider-support] automatic starting ?

[Mike McCarthy, W1NR]

You need to disable the getty for tty6 otherwise there is a conflict...

Put a # in front of the line

6:2345:respawn:/sbin/mingetty tty6

73 de Mike, W1NR


f8arr wrote:
> hum, effectivly the ttys3 wasn't set.
> 
> Here is my last inittab :
> 
> 
> -------------------------
> #
> # /etc/inittab
> #
> # Copyright (c) 1996-2002 SuSE Linux AG, Nuernberg, Germany.  All rights 
> reserved.
> #
> # Author: Florian La Roche, 1996
> # Please send feedback to http://www.suse.de/feedback
> #
> # This is the main configuration file of /sbin/init, which
> # is executed by the kernel on startup. It describes what
> # scripts are used for the different run-levels.
> #
> # All scripts for runlevel changes are in /etc/init.d/.
> #
> # This file may be modified by SuSEconfig unless CHECK_INITTAB
> # in /etc/sysconfig/suseconfig is set to "no"
> #
> 
> # The default runlevel is defined here
> id:3:initdefault:
> 
> # First script to be executed, if not booting in emergency (-b) mode
> si::bootwait:/etc/init.d/boot
> 
> # /etc/init.d/rc takes care of runlevel handling
> #
> # runlevel 0  is  System halt   (Do not use this for initdefault!)
> # runlevel 1  is  Single user mode
> # runlevel 2  is  Local multiuser without remote network (e.g. NFS)
> # runlevel 4  is  Not used
> # runlevel 5  is  Full multiuser with network and xdm
> # runlevel 6  is  System reboot (Do not use this for initdefault!)
> #
> l0:0:wait:/etc/init.d/rc 0
> l1:1:wait:/etc/init.d/rc 1
> l2:2:wait:/etc/init.d/rc 2
> l3:3:wait:/etc/init.d/rc 3
> l4:4:wait:/etc/init.d/rc 4
> l5:5:wait:/etc/init.d/rc 5
> #l6:6:wait:/etc/init.d/rc 6
> 
> # what to do in single-user mode
> ls:S:wait:/etc/init.d/rc S
> ~~:S:respawn:/sbin/sulogin
> 
> # what to do when CTRL-ALT-DEL is pressed
> ca::ctrlaltdel:/sbin/shutdown -r -t 4 now
> 
> # special keyboard request (Alt-UpArrow)
> # look into the kbd-0.90 docs for this
> kb::kbrequest:/bin/echo "Keyboard Request -- edit /etc/inittab to let 
> this work."
> 
> # what to do when power fails/returns
> pf::powerwait:/etc/init.d/powerfail start
> pn::powerfailnow:/etc/init.d/powerfail now
> #pn::powerfail:/etc/init.d/powerfail now
> po::powerokwait:/etc/init.d/powerfail stop
> 
> # for ARGO UPS
> sh:12345:powerfail:/sbin/shutdown -h now THE POWER IS FAILING
> 
> # getty-programs for the normal runlevels
> # <id>:<runlevels>:<action>:<process>
> # The "id" field  MUST be the same as the last
> # characters of the device (after "tty").
> 1:2345:respawn:/sbin/mingetty --noclear tty1
> 2:2345:respawn:/sbin/mingetty tty2
> 3:2345:respawn:/sbin/mingetty tty3
> 4:2345:respawn:/sbin/mingetty tty4
> 5:2345:respawn:/sbin/mingetty tty5
> 6:2345:respawn:/sbin/mingetty tty6
> #
> #S0:12345:respawn:/sbin/agetty -L 9600 ttyS0 vt102
> 
> #
> #  Note: Do not use tty7 in runlevel 3, this virtual line
> #  is occupied by the programm xdm.
> #
> 
> #  This is for the package xdmsc, after installing and
> #  and configuration you should remove the comment character
> #  from the following line:
> #7:3:respawn:+/etc/init.d/rx tty7
> 
> 
> # modem getty.
> # mo:235:respawn:/usr/sbin/mgetty -s 38400 modem
> 
> # fax getty (hylafax)
> # mo:35:respawn:/usr/lib/fax/faxgetty /dev/modem
> 
> # vbox (voice box) getty
> # I6:35:respawn:/usr/sbin/vboxgetty -d /dev/ttyI6
> # I7:35:respawn:/usr/sbin/vboxgetty -d /dev/ttyI7
> 
> DX:235:respawn:/bin/su -c "/usr/bin/perl -w /spider/perl/cluster.pl" 
> sysop >/dev/tty6
> 
> ##Start DXSpider on bootup and respawn it should it crash
> #DX:235:respawn:/bin/su -c "/usr/bin/perl -w /spider/perl/cluster.pl" 
> sysop >/dev/null
> #DX:235:respawn:/bin/su  -c "/usr/bin/perl -w /spider/perl/cluster.pl" 
> sysop > /dev/tty6
> #dx:235:respawn:/bin/su - sysop -c "/usr/bin/perl -w 
> /spider/perl/cluster.pl"
> 
> DX:235:respawn:/bin/su -c "/usr/bin/perl -w /spider/perl/cluster.pl" 
> sysop >/dev/tty6
> 
> # end of /etc/inittab
> 
> ------------------------------------------
> 
> 
> When i do "telinit q"
> 
> I have no problem under /var/log/messages
> 
> --------------
>  init: Re-reading inittab
> ---------------
> 
> 
> Best regards
> Guillaume f8arr
> 
> 
> 
> 
> 
> Dirk Koopman a écrit :
>> f8arr wrote:
>>   
>>> hue !
>>>
>>> Thanks for help but it doesn't work better..  of course with bad word i 
>>> had no chances it works, but it was an keyboard mistake.
>>> I have made modifications to be sure..
>>>
>>> no better :-(
>>>
>>> DX:235:respawn:/bin/su -c "/usr/bin/perl -w /spider/perl/cluster.pl" 
>>> sysop >/dev/ttys3
>>>
>>>     
>>  > /dev/tty6. ttys3 probably does not exist.
>>
>> and you to need # out
>>
>> 6:2345:respawn:/sbin/mingetty tty6
>>
>> so that you don't contend for the same tty.
>>
>> Dirk
>>
>> _______________________________________________
>> Dxspider-support mailing list
>> Dxspider-support at dxcluster.org
>> http://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
>>
>>   
> 
> _______________________________________________
> Dxspider-support mailing list
> Dxspider-support at dxcluster.org
> http://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
> 
>