[Dxspider-support] Console Access / Sysop ?
arsg0lgj@arsg0lgj.plus.com
arsg0lgj at arsg0lgj.plus.com
Sat Sep 22 16:03:49 CEST 2007
Hi Iain yes tried that using putty instead of telnet also tried telnet
from DXVars.pm file using g3ldi as my login same thing set/spider
set/arcluster etc returns not allowed.
Regards
#
# Copyright (c) 1998-2007 - Dirk Koopman G1TLH
#
#
package main;
# this really does need to change for your system!!!!
# use CAPITAL LETTERS
$mycall = "GB7RDX-1";
# your name
$myname = "Roger";
# Your 'normal' callsign (in CAPTTAL LETTERS)
$myalias = "G3LDI";
# Your latitude (+)ve = North (-)ve = South in degrees and decimal degrees
$mylatitude = +52.68584579;
# Your Longtitude (+)ve = East, (-)ve = West in degrees and decimal degrees
$mylongitude = +0.94518260;
# Your locator (USE CAPITAL LETTERS)
$mylocator = "JO02LQ";
# Your QTH (roughly)
$myqth = "Swardeston Norwich, Norfolk";
# Your e-mail address Iain Philipps wrote:
> Mark,
>
> From the machine running the cluster, you need to "telnet localhost",
> and then log in using the callsign assigned as Sysop.
>
>
> Regards - Iain
>
>
> ----- Original Message -----
> *From:* arsg0lgj at arsg0lgj.plus.com
> <mailto:arsg0lgj at arsg0lgj.plus.com%20>
> *To:* dxspider-support at dxcluster.org
> <mailto:dxspider-support at dxcluster.org>
> *Sent:* Saturday, September 22, 2007 2:24 PM
> *Subject:* [Dxspider-support] Console Access / Sysop ?
>
> Hi all trying to get DX spider working for GB7RDX installed on XP
> platform
> All installed ok and perl spider.pl runs and works ok
>
> A couple of issues
> If I use perl winclient.pl it logs me in but does no accept the
> command I can see command echo but hitting return gives me no
> output or no prompt back
> If I login using telent or putty I get command prompts back but if
> I issue a set/spider Callsign it responds "Not allowed"
>
> Is there another was of logging in as sysop.
>
> Thanks in advance.
>
>
>
>
>
> --
> Mark Taylor
> G0LGJ
>
> http://www.g0lgj.co.uk
> QRZ on 145.625Mhz 433.275Mhz
> APRS Node MB7UNR
>
> *************************************************************************
> This E-mail is only for the use of the intended recipients and may
> contain confidential information. If you have received this E-mail
> in error, please notify the sender immediately, delete the E-mail
> and do not use or disseminate its contents.
> *************************************************************************
>
>
>
> ------------------------------------------------------------------------
> _______________________________________________
> Dxspider-support mailing list
> Dxspider-support at dxcluster.org
> http://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
>
>
> --
> This email has been verified as Virus free
> Virus Protection and more available at http://www.plus.net
>
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Dxspider-support mailing list
> Dxspider-support at dxcluster.org
> http://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.tobit.co.uk/pipermail/dxspider-support/attachments/20070922/bd18f6d7/attachment.htm
More information about the Dxspider-support
mailing list