[Dxspider-support] [Fwd: ClusterJoin... Mix your Telnet Cluster Spots and CW Skimmer spots into same application.]

Bela Markus ha5di at freemail.hu
Tue Nov 11 06:39:00 GMT 2008

Few years ago I made tests conencting to several SPIDER's at the same 
time to see any difference using EU, U, ... links. The fact is that 
there are no any benefit using multiple links except a protection agains 
link outage.

73... Béla, HA5DI

Danilo Brelih írta:
> Spiders hi
> More headache with more multiply connections are on the way ... !?
> CUL Dan, S50U @ S50CLX
> http://s50clx.infrax.si
> -------- Izvirno sporočilo --------
> Zadeva: [CQ-Contest] ClusterJoin... Mix your Telnet Cluster Spots and 
> CW    Skimmer spots into same application.
> Datum: Mon, 10 Nov 2008 16:40:21 -0500
> Od: Gerry Hull <gerry at w1ve.com>
> Za: CQ-Contest <cq-contest at contesting.com>, "Tom - N1MM" 
> <Tom at n1mm.com>,     yccc at yccc.org
> http://www.w1ve.com/ClusterJoin.zip
> This is free software.
> What it is:   It's a TCP Daemon that listens for connections on a port
> (23 is the default, Telnet) and connects to other servers, and mixes the
> content.
> Once you've connected, you can then connect to as many telnet spot
> sources as you would like.
> I dreamed this up as a way to connect CW Skimmer and an external cluster
> to N1MM at the same time....  Therefore, get the spots from Skimmer
> along with everything from the net.
> Example:
> ------   K1TTT.NET (for example)
>                                                                        /
> N1MM setup to connect to ClusterJoin (locahost)
>                                                                       \
> ------- CW SKIMMER on localhost:7300
> There is no limit to the number of clients that can connect to
> ClusterJoin, as well as no limits on the number of clusters you can
> connect to.
> I think, perhaps, it's silly to connect more than one real-world
> cluster, unless you want  to...
> All traffic sent to ClusterJoin  goes to all connected telnet sessions.
> you must log in to each session. You'lll get instructions when you log
> in.
> ClusterJoin.exe is a 14Kb file, and is a Windows Console application.
> Just leave it running and minimize. It is a .Net application and
> requires the .Net Framework 2.0 be installed on your system.  You can
> get that from Microsoft's site if you don't have it.
> No install -- just extract ClusterJoin.exe from the Zip file and go.
> I'm not on the CWSkimmer reflector, so some one please pass it on.
> Enjoy! 73, Gerrry W1VE
> _______________________________________________
> CQ-Contest mailing list
> CQ-Contest at contesting.com
> http://lists.contesting.com/mailman/listinfo/cq-contest
> _______________________________________________
> Dxspider-support mailing list
> Dxspider-support at dxcluster.org
> http://mailman.tobit.co.uk/mailman/listinfo/dxspider-support

More information about the Dxspider-support mailing list