[Dxspider-support] Filters

[Anthony(N2KI)]

Roland,

Interesting.  I tried the same here but for some reason -9 does not respond to filtration.  Any other SSID  works. The
important thing is it works for the users.  Thanks.

 
Anthony - N2KI
30MDG - 1187
 www.n2ki.com
 
 
-----Original Message-----
From: dxspider-support-bounces at dxcluster.org [mailto:dxspider-support-bounces at dxcluster.org] On Behalf Of ON6HH Roland
Huysentruyt
Sent: Tuesday, December 08, 2009 2:39 AM
To: The DXSpider Support list
Subject: Re: [Dxspider-support] Filters

hi Anthony
I did a test ( zone 14)  and it did not work either until i reconnected .
Now ok.
73 Roland ,ON6HH,sysop ON0DXK

on6hh at ktk.be
------------------------------------------------------------
Roland Huysentruyt  Tel 051 303000
----- Original Message ----- 
From: "Anthony(N2KI)" <n2ki at amsat.org>
To: "'The DXSpider Support list'" <dxspider-support at dxcluster.org>
Sent: Tuesday, December 08, 2009 1:37 AM
Subject: Re: [Dxspider-support] Filters


> Here is my sh/filter output.
>
> sh/filter
> N2KI-9 : spots
> filter1 reject on uhf
> filter1 accept by_zone 5
> filter2 reject on vhf
> filter3 reject on 6m
> N2KI-9 de N2KI  8-Dec-2009 0035Z dxspider >
>
>
>
>
> Anthony - N2KI
> 30MDG - 1187
> www.n2ki.com
>
>
>
> -----Original Message-----
> From: dxspider-support-bounces at dxcluster.org 
> [mailto:dxspider-support-bounces at dxcluster.org] On Behalf Of Dirk Koopman 
> G1TLH
> Sent: Monday, December 07, 2009 2:41 AM
> To: wb8zrl at inavia.net; The DXSpider Support list
> Subject: Re: [Dxspider-support] Filters
>
> Tom Vavra wrote:
>> On Monday 07 December 2009 01:57, Anthony(N2KI) wrote:
>>> Anyone having trouble setting filters?
>>>
>>>
>>>
>>> No matter which filter I set, it does not seem to work.
>>>
>>>
>>>
>>> For example, according to the filter manual acc/spot 4 by_zone 5 should
>>> only accept spots posted by stations in CQ zone 5.  I still get stuff 
>>> from
>>> everywhere.
>>>
>>>
>>>
>>> I also tried acc/spot 4 by_state and I still get stuff from everywhere.
>>>
>>>
>>>
>>> The syntax was gotten from the manual on Wiki.  Thank for any 
>>> suggestions.
>>>
>>>
>>>
>>>
>>>
>>> Anthony - N2KI
>>>
>>> 30MDG - 1187
>>>
>>>  www.n2ki.com
>>
>> Anthony
>>
>>         acc/spot 4 by_zone 5              will accept zone 5 spots, but 
>> it
>> tells DXSpider nothing about what to do with other spots.  Unless you 
>> somehow
>> reject them, you will see them.
>>
>>         reject/spot 5 all                        is one example
>>
>> to see only zone 5 spots try
>>
>>       reject/spot not by_zone 5
>>
>
> Er...
>
> This isn't actually true.
>
> Once you set up a spot filter, then that will *automatically* do the
> opposite for everything else. If that makes any sense at all.
>
> acc/spot by_zone 5
>
> implies
>
> rej/spots by_zone "everything else"
>
> (this is not a command !)
>
> rej/spots by_zone all
>
> Would not do what you think. It will mean that you get no spots at all
> if you do. This is because the filters act linearly, one after another,
> acting one whatever is left after the previous line. So, in this case,
> what is left is just zone 5 spots, doing the rej/spot by_zone all will
> get rid those zone 5 spots.
>
> I am wondering why you are using slot 4, rather the default:-
>
> acc/spot by_zone 5
>
> do you have a chain of filter commands? If you do then post the output
> of a "sh/filter" command.
>
> Please be aware that if one has a chain, the assertion I made above
> happens after each filter command. So if one mixes acc/spot with
> rej/spot, it is *very* easy to get confused. And one must remember that
> the last filter in the chain determines what happens to whatever is left.
>
> The filter that you are setting up is just for you. Not any of your
> users. Is this what you want?
>
> Dirk
>
> _______________________________________________
> Dxspider-support mailing list
> Dxspider-support at dxcluster.org
> http://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
>
>
> _______________________________________________
> Dxspider-support mailing list
> Dxspider-support at dxcluster.org
> http://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
> 


_______________________________________________
Dxspider-support mailing list
Dxspider-support at dxcluster.org
http://mailman.tobit.co.uk/mailman/listinfo/dxspider-support