[Dxspider-support] Auto start second cluster

[Peter]

Dirk and all

The two lines are:
dx1:235:respawn:/bin/su -c "/usr/bin/perl -w /spider/perl/cluster.pl"  
sysop >/dev/null
dx2:235:respawn:/bin/su -c "DXSPIDER_ROOT=/home/sysop2 /usr/bin/perl -w 
/home/sysop2/spider/perl/cluster.pl" sysop2 >/dev/null

I can manualy start the cluster as sysop2 via
/home/sysop2/spider/perl/cluster.pl
And the clsuter is fully running, accepting connenctions, send out spot 
and so on.

I have # out DX1 and telinit Q. Cluster DX1 stopped but DX2 didn't start

Tried an other /dev/ but doesn't matter

The sytem is a vitual lixux server in a data centre so a output to tty7 
will not show info here on the screen
This weekend I got about 150-170 users on DX1 with DX2 running as well 
with 5 users
I want to use DX2 as prived cluster with filters to our needs as contest 
station and with skimmer feeds
To be shure I have set/badnode for DX2 node at DX1 to prevent unwanted 
spots for DX2 sendout to the backbone
DX2 has set/isolate aswell

Peter
PC2A





Dirk Koopman G1TLH schreef:
> Look in /etc/inittab and post the two lines starting the cluster.
>
> The other thing to do might be to # out the dx2 line, telinit q
>
> then copy and paste the command you are trying to execute, but in a 
> shell and see what happens.
>
> On 03/11/11 20:33, Peter wrote:
>> Bob
>>
>> In the log file I found:
>> Nov 3 20:02:33 pi4cc init: Id "dx2" respawning too fast: disabled for 5
>> minutes
>>
>> ???
>>
>> Peter
>>
>> NBob Tenty schreef:
>>> The system logs are in /var/log look in syslog, messages
>>>
>>> dmesg can also give a clue.
>>>
>>> 73,
>>>
>>> Bob VE3TOK
>>>
>>> On 11-11-03 04:03 PM, Peter wrote:
>>>> Hi
>>>>
>>>> Sorry that I come back with the same question of " How to auto start a
>>>> second cluster"
>>>> April 2010 I had the same question and I got I working.
>>>> But now the second cluster refuse to start.
>>>>
>>>> Cluster 1 is running as sys op (home/sysop) and the second as sysop2
>>>> (home/sysop2)
>>>> Manual starting the second cluster via
>>>> /home/sysop2/spider/perl/cluster.pl will bring up the cluster.
>>>>
>>>> DXSPIDER_ROOT is correct:
>>>> sysop2 at pi4cc:~$ echo $DXSPIDER_ROOT
>>>> /home/sysop2/spider
>>>> sysop2 at pi4cc:~$
>>>>
>>>> In /etc/inittab I have the 2 lines:
>>>> dx1:235:respawn:/bin/su -c "/usr/bin/perl -w /spider/perl/cluster.pl"
>>>> sysop >/dev/null
>>>> dx2:235:respawn:/bin/su -c "DXSPIDER_ROOT=/home/sysop2 
>>>> /usr/bin/perl -w
>>>> /home/sysop2/spider/perl/cluster.pl" sysop2 >/dev/null
>>>>
>>>> Yes I do telinit q after changes
>>>> DX1 is autostarting and DX2 refuses.
>>>> Is there somewhere a log file of inittab with an output to see if 
>>>> there
>>>> is any error?
>>>>
>>>> What do I wrong?
>>>> Running the system on a debian linux OS
>>>>
>>>> Peter
>>>> PC2A/PI4CC