[Dxspider-support] Auto start second cluster

[Peter]

Hi All

I still can't managed  to autostart 2 dx-spiders on my Debian setup
dx1 is auto starting after a reboot, but dx2 refuse
I got the warning in syslog :
dx2" respawning too fast: disabled for 5 minutes

A manual startup for DX2 works  fine

Perhaps its has tot do something paths (?)
dx2 is in  /home/sysop2 and when start-up I go manualy  to  spider/perl 
and call./cluster.pl

An output of ps | aux  clusters.pl:
pi4cc:~# ps aux | grep cluster.pl
sysop     1027  0.0  0.2  31244  1120 ?        Ss   01:02   0:00 /bin/su 
-c /usr/bin/perl -w /spider/perl/cluster.pl sysop
sysop     1040  1.1  7.6  86228 38492 ?        S    01:02   5:25 
/usr/bin/perl -w /spider/perl/cluster.pl
sysop2   23664  0.5  5.5  80376 28256 pts/0    S    08:50   0:02 
/usr/bin/perl -w ./cluster.pl
root     24092  0.0  0.1   3932   540 pts/1    S+   08:57   0:00 grep 
cluster.pl

There is only 1 line for sysop2.
Is this a clue?

Peter
PC2A/PI4CC


 
Bob Tenty schreef:
> You see that if it tries to restart it too much because it doesn't run.
>
> can you hash out/ disable cluster 1 and see or it only runs with dx 2
> Line of dx2 looks OK but try the above.
>
> Here I run it in a virtual tty not in use, so instead  of /dev/null 
> /dev/tty7 for instance. So you can run dx1 and dx2 in two different 
> tty's who are not in use.
>
> 73,
>
> Bob VE3TOK
>
> On 11-11-03 04:33 PM, Peter wrote:
>> Bob
>>
>> In the log file I found:
>> Nov 3 20:02:33 pi4cc init: Id "dx2" respawning too fast: disabled for 5
>> minutes
>>
>> ???
>>
>> Peter
>>
>> NBob Tenty schreef:
>>> The system logs are in /var/log look in syslog, messages
>>>
>>> dmesg can also give a clue.
>>>
>>> 73,
>>>
>>> Bob VE3TOK
>>>
>>> On 11-11-03 04:03 PM, Peter wrote:
>>>> Hi
>>>>
>>>> Sorry that I come back with the same question of " How to auto start a
>>>> second cluster"
>>>> April 2010 I had the same question and I got I working.
>>>> But now the second cluster refuse to start.
>>>>
>>>> Cluster 1 is running as sys op (home/sysop) and the second as sysop2
>>>> (home/sysop2)
>>>> Manual starting the second cluster via
>>>> /home/sysop2/spider/perl/cluster.pl will bring up the cluster.
>>>>
>>>> DXSPIDER_ROOT is correct:
>>>> sysop2 at pi4cc:~$ echo $DXSPIDER_ROOT
>>>> /home/sysop2/spider
>>>> sysop2 at pi4cc:~$
>>>>
>>>> In /etc/inittab I have the 2 lines:
>>>> dx1:235:respawn:/bin/su -c "/usr/bin/perl -w /spider/perl/cluster.pl"
>>>> sysop >/dev/null
>>>> dx2:235:respawn:/bin/su -c "DXSPIDER_ROOT=/home/sysop2 
>>>> /usr/bin/perl -w
>>>> /home/sysop2/spider/perl/cluster.pl" sysop2 >/dev/null
>>>>
>>>> Yes I do telinit q after changes
>>>> DX1 is autostarting and DX2 refuses.
>>>> Is there somewhere a log file of inittab with an output to see if 
>>>> there
>>>> is any error?
>>>>
>>>> What do I wrong?
>>>> Running the system on a debian linux OS
>>>>
>>>> Peter
>>>> PC2A/PI4CC