[Dxspider-support] Port forwarding issue on a Netgear router

[Michael Walker]

Hi Bob

Something is strange, and I am sure you will agree.  Is your ISP blocking
something?

Mike va3mw


On Wed, Oct 12, 2011 at 8:18 PM, Bob Nielsen <n7xy at clearwire.net> wrote:

> Mike,
>
> I found an unofficial build of dd-wrt for my WNDR4000 but port forwarding
> isn't working on that either.  I tried both the mini and the larger version.
>  I also found some hints for port forwarding issues in the wiki and will
> give them a try.
>
> 73, Bob N7XY
>
> On Oct 12, 2011, at 5:08 PM, Michael Walker wrote:
>
> > Bob
> >
> > The DD-WRT code is rock solid if you can get it loaded.  By that, I  mean
> that it is built for your specific router.. That is the ONLY code I run on
> consumer grade routers.
> >
> > For most cases, as you need is the 'mini' version of the code loaded.
> >
> > Depending on which model of Linksys router you have, it might loaded on
> that as well.  The DD-WRT Wiki is pretty good.
> >
> > Mike va3mw
> >
> >
> > On Wed, Sep 21, 2011 at 10:39 AM, Bob Nielsen <n7xy at clearwire.net>
> wrote:
> > Thanks for the reply Tony.
> >
> > I did set up the router to forward port 7300 but it does not work.  I
> have contacted Netgear support and they are looking into the problem.  I
> found that there is an unofficial version of DD-WRT firmware available for
> this model and may try that if they can't resolve it.  In the meantime, I
> will switch back to my older Linksys router today, since it was forwarding
> the port successfully.  The DHCP server on that router is a bit flakey,
> which is why I bought the new router, but I can live with that by resetting
> the router periodically.
> >
> > 73, Bob N7XY
> >
> > On Sep 21, 2011, at 5:39 AM, Radioman wrote:
> >
> > > Bob,
> > >
> > > I have some net-gear routers and you'll need to make the 7300 service
> before
> > > you can forward it,
> > >
> > > I believe your router has the same params, also I tried to ping your
> host
> > > name and it don't resolve, well at least not from here anyway..
> > >
> > > Couple of things to look for
> > >
> > > 1: did my address change?
> > > 2: can I ping my own address?
> > > 3: can I make a service in the router call 7300 on a TCP port
> > > 4: are all the outbound ports unrestricted besides port 80 and 110
> > >
> > > I have a couple of net-gear routers and both need a port 7300 service
> > > created before it can be forwarded.
> > >
> > >
> > > Tony
> > > NN1D
> > >
> > >
> > > -----Original Message-----
> > > From: dxspider-support-bounces at dxcluster.org
> > > [mailto:dxspider-support-bounces at dxcluster.org] On Behalf Of Bob
> Nielsen
> > > Sent: Monday, September 19, 2011 22:20
> > > To: The DXSpider Support list
> > > Subject: [Dxspider-support] Port forwarding issue on a Netgear router
> > >
> > > I have been having some problems with my Linksys router and decided to
> > > switch to a Netgear N750 (WNDR4000) router.  I set it up to forward
> port
> > > 7300 to my DXspider server but it doesn't appear to be working.  The
> > > configuration is pretty close to the Netgear router I used previously
> and I
> > > have double-checked everything but the connection is not forwarded.
> > > Outgoing connects and connections from within my LAN are working
> normally.
> > >
> > > Has anyone else had issues with Netgear routers?
> > >
> > > Bob, N7XY
> > > _____
> > > N7XY DX Cluster Node - telnet to n7xy.net, port 7300
> > >
> > >
> > >
> > >
> > >
> > >
> > > _______________________________________________
> > > Dxspider-support mailing list
> > > Dxspider-support at dxcluster.org
> > > http://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
> > >
> > >
> > > _______________________________________________
> > > Dxspider-support mailing list
> > > Dxspider-support at dxcluster.org
> > > http://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
> >
> > _____
> > N7XY DX Cluster Node - telnet to n7xy.net, port 7300
> >
> >
> >
> >
> >
> >
> > _______________________________________________
> > Dxspider-support mailing list
> > Dxspider-support at dxcluster.org
> > http://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
> >
> > _______________________________________________
> > Dxspider-support mailing list
> > Dxspider-support at dxcluster.org
> > http://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
>
> _____
> N7XY DX Cluster Node - telnet to n7xy.net, port 7300
>
>
>
>
>
>
> _______________________________________________
> Dxspider-support mailing list
> Dxspider-support at dxcluster.org
> http://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
>



-- 
Michael Walker

*Michael Walker Technology *
*
*
*Michael Walker Aerial Photography*
*www.walkerphotography.ca*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.tobit.co.uk/pipermail/dxspider-support/attachments/20111012/4b964348/attachment-0001.html>